Panasonic PT-D5000E manual Projecting  Switching off the projector,  Direct power off function

Page 20

Projecting

Switching off the projector

Lens home position

Basic Operation

1.Press the POWER STANDBY button.

The confirmation screen will be displayed.

POWER STANDBY button

2.Select OK and press the ENTER button, or press the POWER STANDBY button again.

The projection of the image stops, and the power indicator of the projector lights up orange. The cooling fan keeps running.

3.When the power indicator of the projector turns to red, switch the POWER switch to OFF.

When the power indicator of the projector turns to red, the cooling fan stops.

While the cooling fan is still running, never turn off the POWER switch, nor unplug the mains lead from the mains socket.

NOTE:

•In the cooling state after the power is turned off, the lamp will not light up even if the power is turned on. To light up the lamp, turn on the power supply again when the lamp has been cooled sufficiently. Failure to observe this may shorten the lamp life.

Direct power off function

The power supplied internally causes the cooling fan to continue operating and cool off in the event that the power has failed or even after the mains lead is accidentally disconnected immediately after the power has been turned off.

NOTE:

•When the lamp has been cooled by the direct power off function, it sometimes takes longer than usual for the lamp to light up again.

•While the cooling fan is operating, do not place the projector inside a box or bag.

1.Press and hold the LENS button of the control button on the projector or SHIFT button of the remote control for 3 seconds or more.

The HOME POSITION setup screen will be displayed for 5 seconds.

2.Press the ENTER button before the setup screen disappeared.

While the lens returning to the home position, a message “PROGRESS” appears on the screen.

NOTE:

•The home position for the projection lens is the lens position when the lens is being replaced or when the projector is being stored away, and it is not the optical centre of the screen.

Adjustment range after lens

position (optical shift)

Do not move the lens beyond the bounds of the shift range as this may cause a change in the focus. This limitation is to protect the parts of the projector. Using the standard projection position as the reference, the optical axis shift function makes it possible to adjust the projection position in the ranges shown in the figures below.

PT-DZ6710E/PT-DZ6700E/PT-D6000E/

PT-D5000E

Standard projection position

PT-DW6300E

Standard projection position

ENGLISH - 20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents PT-DZ6700E PT-DW6300E PT-D6000E PT-D5000E Important Safety Notice To rain or moistureEnvironment care information for users in China Important Safety NoticeFor business users in the European Union For Your SAFETY, Please Read the Following Text Carefully Important the Moulded Plug U.K. onlyContents Precautions with regard to safety Precautions with regard to safety Do not set up the projector outdoors Remove the used batteries from the remote control promptlyDo not put your weight on this projector Do not use chemical treated wipes when cleaningReplacement of the lamp unit should only be carried Do not reach for the openings beside the opticalBe sure to always remove the lens during transport Order to get the best picture qualityOthers SecurityAccessories  Top, front and bottom view About Your ProjectorProjector body  Side views About Your ProjectorRemote control When multiple projectors are connected as part Number, and the remote control 2 digits ID number mustBe set to match the intended projector. The default IN/OUT terminal. It is effective to use the wired remoteSetting up  Cautions when setting the projectorsProjection method Over 10 cmSetting up Removing and attaching the projection lens Removing the projection lens from the projector  Attaching the projection lens to the projector Connecting Mains lead Switching on the projector  Adjusting focus, zoom and shiftPower switch AC in terminal Projecting Adjustment range after lens Position optical shift Projecting  Switching off the projector Direct power off function Remote control operation Setting up the image position automaticallyOperating range  Facing to the projectorSwitching the input signal Stopping the projectionClearing the on-screen menu Changing the picture aspect ratioDisplaying the status of the projector Using an assigned functionResetting to the factory default Menu Navigation Main menu and Sub-menuRS-232C PT-DZ6710E/PT-DZ6700E/PT-DW6300E onlyMenu Navigation Security Adjusting with the bar scale items  Operating procedureNavigating through the menu  Displaying the Main menuMonitor Lamp indicators Managing the indicated problems LAMP1/LAMP2 indicator  Temp indicatorStatus in Projector Monitor Lamp indicators  Filter indicatorStatus in Projector Setup menu Replacement  When to replace the lamp unitReplacing the Lamp unit  Before replacing the Lamp unit Removing and replacing the lamp unit Lamp unit cover fixing screwLamp u nit fixing screws HandleReplacing the Auto Cleaning Filter ACF Troubleshooting List of compatible signals Technical Information Display dots of each model PT-DZ6710EPT-DZ6700E PT-DW6300ESpecifications Technical InformationSerial Ceiling mount Ceiling mount bracket safeguards Attachment procedure Unit mm inch DimensionsTrademark acknowledgements Index Index

PT-D6000E, PT-DW6300E, PT-D5000E, PT-DZ6700E, PT-DZ6710E specifications

Panasonic's line of professional projectors, including the PT-D6000E, PT-DZ6700E, PT-DW6300E, PT-DZ6710E, and PT-D5000E, represents a powerful combination of advanced technology and exceptional performance, designed for a wide range of applications, including large venues, auditoriums, and corporate events.

The PT-D6000E is known for its impressive 6000 lumens brightness, delivering vivid images even in well-lit environments. Its high-resolution WUXGA (1920 x 1200) display ensures sharp details and clarity, making it ideal for presentations and multimedia displays. The projector's Dual Lamp System provides redundancy and enhances reliability, ensuring uninterrupted operation. Additionally, its compact design makes it easy to install and transport.

The PT-DZ6700E offers even more power with an incredible 7000 lumens brightness. This model features 3LCD technology, which enhances color accuracy and ensures vibrant imagery. The high contrast ratio coupled with a vivid color reproduction process makes this projector perfect for events that require impactful visuals. The projector also supports various lens options, allowing for flexible installation in different environments.

For those seeking a cost-effective solution, the PT-DW6300E delivers 6000 lumens brightness paired with a WXGA (1280 x 800) resolution. This model is particularly suitable for educational settings and small-to-medium venues. It is also equipped with advanced cooling systems to manage heat effectively, extending operational life and maintaining optimal performance.

The PT-DZ6710E is an upgrade to the DZ6700E, boasting 8100 lumens brightness. This model retains the same 3LCD technology while featuring improved lens options and remote management capabilities, allowing users to control and monitor multiple units seamlessly. This is ideal for larger installations where multiple projectors are used for synchronized presentations.

Lastly, the PT-D5000E provides a robust solution for those requiring 5000 lumens brightness in a more compact package. With a 1024 x 768 resolution, this model is effective for a variety of applications, maintaining good image quality while offering a balance between performance and portability.

All these models incorporate features such as lens shift capability, multiple connectivity options, and 24/7 operation capabilities, making them versatile tools for any presentation need. With their high brightness, excellent color reproduction, and reliability, these Panasonic projectors are well-suited for demanding settings, providing outstanding value to users across various sectors.
Top Page Image Contents