Panasonic PT-DZ6700E Monitor Lamp indicators  Filter indicator, Status in Projector Setup menu

Page 29

Monitor Lamp indicators

FILTER indicator

The FILTER indicates the Auto Cleaning Filter (ACF) unit status.

Lamp

Information

 

Check point

 

Remedial measure

indication

 

 

 

 

 

 

 

 

 

Check the REMAINING FILTER

Replace the ACF unit.

Lighting in red

The ACF unit has run out.

 

of STATUS in PROJECTOR

 

 

 

 

 

SETUP menu.

 

 

Blinking in red

The ACF unit is not

Check the ACF unit

Replace the ACF unit.

installed.*1

 

compartment.

 

 

 

 

 

 

 

The ACF unit remains

Check the REMAINING FILTER

Request the dealer to purchase the new

Lighting in

few. The remaining use

 

of STATUS in PROJECTOR

 

ACF unit.

time of the ACF unit is

 

SETUP menu.

 

 

orange

 

 

 

approximately

 

 

 

 

 

 

 

 

 

 

200 hours.*2

 

 

 

 

 

 

Is foreign object blocking the

Remove the foreign object from the ACF

Blinking in

The ACF unit cannot

 

ACF unit operation?

 

unit.

orange

operate properly.

 

 

• When the foreign object still remained,

 

 

 

 

 

contact the dealer.

*1. When the ACF unit is not installed, the filter indicator will blink in red and the power will turn off.

*2. 200 hours is the roughly guided time.

NOTE:

When the FILTER indicator is flashing green, the Auto Cleaning Filter (ACF) is normally rolling up.

When the ACF unit is operating, operational sound may be heard.

In a dusty environment, the guided remaining use time will be shorter. Contact the dealer to purchase the new ACF unit earlier.

If using the projector at high elevations 1 400 - 2 700 m (4 593 - 8 858 ft) sea level and HIGH ALTITUDE MODE in PROJECTOR SETUP menu is OFF, it may cause malfunction of the ACF unit.

Before the FILTER indicator blinks in orange when operational malfunction, mechanical sound of the clutch may be heard.

Maintenance

ENGLISH - 29

Image 29
Contents PT-DZ6700E PT-DW6300E PT-D6000E PT-D5000E To rain or moisture Important Safety NoticeEnvironment care information for users in China Important Safety NoticeFor business users in the European Union Important the Moulded Plug U.K. only For Your SAFETY, Please Read the Following Text CarefullyContents Precautions with regard to safety Precautions with regard to safety Remove the used batteries from the remote control promptly Do not set up the projector outdoorsDo not put your weight on this projector Do not use chemical treated wipes when cleaningDo not reach for the openings beside the optical Replacement of the lamp unit should only be carriedBe sure to always remove the lens during transport Order to get the best picture qualitySecurity OthersAccessories  Top, front and bottom view About Your ProjectorProjector body About Your Projector  Side viewsRemote control Number, and the remote control 2 digits ID number must When multiple projectors are connected as partBe set to match the intended projector. The default IN/OUT terminal. It is effective to use the wired remote Cautions when setting the projectors Setting upProjection method Over 10 cmRemoving and attaching the projection lens Setting up Removing the projection lens from the projector  Attaching the projection lens to the projectorMains lead  Connecting Adjusting focus, zoom and shift  Switching on the projectorPower switch AC in terminal Projecting Adjustment range after lens Position optical shift Projecting  Switching off the projector Direct power off function Setting up the image position automatically Remote control operationOperating range  Facing to the projectorStopping the projection Switching the input signalClearing the on-screen menu Changing the picture aspect ratioDisplaying the status of the projector Using an assigned functionResetting to the factory default Main menu and Sub-menu Menu NavigationPT-DZ6710E/PT-DZ6700E/PT-DW6300E only RS-232CSecurity Menu Navigation Operating procedure  Adjusting with the bar scale itemsNavigating through the menu  Displaying the Main menuManaging the indicated problems Monitor Lamp indicators LAMP1/LAMP2 indicator  Temp indicatorStatus in Projector Monitor Lamp indicators  Filter indicatorStatus in Projector Setup menu  When to replace the lamp unit ReplacementReplacing the Lamp unit  Before replacing the Lamp unitLamp unit cover fixing screw  Removing and replacing the lamp unitLamp u nit fixing screws HandleReplacing the Auto Cleaning Filter ACF Troubleshooting Technical Information List of compatible signalsPT-DZ6710E  Display dots of each modelPT-DZ6700E PT-DW6300ETechnical Information SpecificationsSerial Ceiling mount Ceiling mount bracket safeguards Attachment procedure Unit mm inch DimensionsTrademark acknowledgements Index Index

PT-D6000E, PT-DW6300E, PT-D5000E, PT-DZ6700E, PT-DZ6710E specifications

Panasonic's line of professional projectors, including the PT-D6000E, PT-DZ6700E, PT-DW6300E, PT-DZ6710E, and PT-D5000E, represents a powerful combination of advanced technology and exceptional performance, designed for a wide range of applications, including large venues, auditoriums, and corporate events.

The PT-D6000E is known for its impressive 6000 lumens brightness, delivering vivid images even in well-lit environments. Its high-resolution WUXGA (1920 x 1200) display ensures sharp details and clarity, making it ideal for presentations and multimedia displays. The projector's Dual Lamp System provides redundancy and enhances reliability, ensuring uninterrupted operation. Additionally, its compact design makes it easy to install and transport.

The PT-DZ6700E offers even more power with an incredible 7000 lumens brightness. This model features 3LCD technology, which enhances color accuracy and ensures vibrant imagery. The high contrast ratio coupled with a vivid color reproduction process makes this projector perfect for events that require impactful visuals. The projector also supports various lens options, allowing for flexible installation in different environments.

For those seeking a cost-effective solution, the PT-DW6300E delivers 6000 lumens brightness paired with a WXGA (1280 x 800) resolution. This model is particularly suitable for educational settings and small-to-medium venues. It is also equipped with advanced cooling systems to manage heat effectively, extending operational life and maintaining optimal performance.

The PT-DZ6710E is an upgrade to the DZ6700E, boasting 8100 lumens brightness. This model retains the same 3LCD technology while featuring improved lens options and remote management capabilities, allowing users to control and monitor multiple units seamlessly. This is ideal for larger installations where multiple projectors are used for synchronized presentations.

Lastly, the PT-D5000E provides a robust solution for those requiring 5000 lumens brightness in a more compact package. With a 1024 x 768 resolution, this model is effective for a variety of applications, maintaining good image quality while offering a balance between performance and portability.

All these models incorporate features such as lens shift capability, multiple connectivity options, and 24/7 operation capabilities, making them versatile tools for any presentation need. With their high brightness, excellent color reproduction, and reliability, these Panasonic projectors are well-suited for demanding settings, providing outstanding value to users across various sectors.