Panasonic PT-D5000E manual When multiple projectors are connected as part, Press the ID SET button

Page 15

 

 

 

 

 

 

About Your Projector

 

 

 

 

 

 

 

Setting projector ID number to

Using a wired remote control

remote control

When multiple projectors are connected as part of the

Each projector can be assigned a unique 2 digits ID

system, connect to units with a M3 stereo mini jack

commercial cable to simultaneously control multiple main

number, and the remote control 2 digits ID number must

units with a single remote control through the REMOTE 1

be set to match the intended projector. The default

IN/OUT terminal. It is effective to use the wired remote

setting of the projector ID is ALL. Set the ID of the

control in the environment in which an obstacle stands in

projector in advance from the menu items.

the light path or where devices are susceptible to outside

1.Press the ID SET button.

light.

Displays the projector ID number on the screen.

 

 

 

 

 

 

2.Within 5 seconds, enter the same number of the required

 

 

 

 

 

 

projector by pressing the numeric buttons.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ID number range: 01 - 64

 

 

 

 

 

 

 

 

 

 

 

 

Preparation

NOTE:

•Do not press the ID SET button accidentally or carelessly because the ID number on the remote control can be set even when no projector is around.

•If you do not enter the 2 digits ID number within 5 seconds after the ID SET button has been pressed, the ID will remain at the number that was set before the ID SET button was pressed.

•Your specified ID will be erased if the batteries of the remote control are left exhausted. When the batteries are replaced, set the same ID number again.

Connect to another projector

M3 stereo mini jack (commercial)

Connect to the remote control wired terminal

NOTE:

•Use 2 core shielded cable of length of 15 m or less. If the length of the cable exceeds 15 m (49'2"), the shielding of the cable may not be sufficient and the remote control may not work.

ENGLISH - 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents PT-DZ6700E PT-DW6300E PT-D6000E PT-D5000E To rain or moisture Important Safety NoticeImportant Safety Notice For business users in the European UnionEnvironment care information for users in China Important the Moulded Plug U.K. only For Your SAFETY, Please Read the Following Text CarefullyContents Precautions with regard to safety Precautions with regard to safety Do not use chemical treated wipes when cleaning Do not set up the projector outdoorsRemove the used batteries from the remote control promptly Do not put your weight on this projectorOrder to get the best picture quality Replacement of the lamp unit should only be carriedDo not reach for the openings beside the optical Be sure to always remove the lens during transportSecurity OthersAccessories About Your Projector Projector body Top, front and bottom view About Your Projector  Side viewsRemote control IN/OUT terminal. It is effective to use the wired remote When multiple projectors are connected as partNumber, and the remote control 2 digits ID number must Be set to match the intended projector. The defaultOver 10 cm Setting up Cautions when setting the projectors Projection method Attaching the projection lens to the projector Setting upRemoving and attaching the projection lens  Removing the projection lens from the projectorMains lead  ConnectingProjecting  Switching on the projector Adjusting focus, zoom and shift Power switch AC in terminalProjecting  Switching off the projector  Direct power off function Adjustment range after lens Position optical shift  Facing to the projector Remote control operationSetting up the image position automatically Operating rangeChanging the picture aspect ratio Switching the input signalStopping the projection Clearing the on-screen menuUsing an assigned function Resetting to the factory defaultDisplaying the status of the projector Main menu and Sub-menu Menu NavigationPT-DZ6710E/PT-DZ6700E/PT-DW6300E only RS-232CSecurity Menu Navigation Displaying the Main menu  Adjusting with the bar scale items Operating procedure Navigating through the menu Temp indicator Monitor Lamp indicatorsManaging the indicated problems  LAMP1/LAMP2 indicatorMonitor Lamp indicators  Filter indicator Status in Projector Setup menuStatus in Projector  Before replacing the Lamp unit Replacement When to replace the lamp unit Replacing the Lamp unitHandle  Removing and replacing the lamp unitLamp unit cover fixing screw Lamp u nit fixing screwsReplacing the Auto Cleaning Filter ACF Troubleshooting Technical Information List of compatible signalsPT-DW6300E  Display dots of each modelPT-DZ6710E PT-DZ6700ETechnical Information SpecificationsSerial Ceiling mount bracket safeguards  Attachment procedureCeiling mount Dimensions Trademark acknowledgementsUnit mm inch Index Index

PT-D6000E, PT-DW6300E, PT-D5000E, PT-DZ6700E, PT-DZ6710E specifications

Panasonic's line of professional projectors, including the PT-D6000E, PT-DZ6700E, PT-DW6300E, PT-DZ6710E, and PT-D5000E, represents a powerful combination of advanced technology and exceptional performance, designed for a wide range of applications, including large venues, auditoriums, and corporate events.

The PT-D6000E is known for its impressive 6000 lumens brightness, delivering vivid images even in well-lit environments. Its high-resolution WUXGA (1920 x 1200) display ensures sharp details and clarity, making it ideal for presentations and multimedia displays. The projector's Dual Lamp System provides redundancy and enhances reliability, ensuring uninterrupted operation. Additionally, its compact design makes it easy to install and transport.

The PT-DZ6700E offers even more power with an incredible 7000 lumens brightness. This model features 3LCD technology, which enhances color accuracy and ensures vibrant imagery. The high contrast ratio coupled with a vivid color reproduction process makes this projector perfect for events that require impactful visuals. The projector also supports various lens options, allowing for flexible installation in different environments.

For those seeking a cost-effective solution, the PT-DW6300E delivers 6000 lumens brightness paired with a WXGA (1280 x 800) resolution. This model is particularly suitable for educational settings and small-to-medium venues. It is also equipped with advanced cooling systems to manage heat effectively, extending operational life and maintaining optimal performance.

The PT-DZ6710E is an upgrade to the DZ6700E, boasting 8100 lumens brightness. This model retains the same 3LCD technology while featuring improved lens options and remote management capabilities, allowing users to control and monitor multiple units seamlessly. This is ideal for larger installations where multiple projectors are used for synchronized presentations.

Lastly, the PT-D5000E provides a robust solution for those requiring 5000 lumens brightness in a more compact package. With a 1024 x 768 resolution, this model is effective for a variety of applications, maintaining good image quality while offering a balance between performance and portability.

All these models incorporate features such as lens shift capability, multiple connectivity options, and 24/7 operation capabilities, making them versatile tools for any presentation need. With their high brightness, excellent color reproduction, and reliability, these Panasonic projectors are well-suited for demanding settings, providing outstanding value to users across various sectors.
Top Page Image Contents