Panasonic pt-ae900e manual Profile, Edit, Cursor

Using the Cinema Colour Management function(C.C.M)

You can adjust, save, and retrieve the settings for the selected colours of the projected image based on the selected picture mode to suit your preference.

Press the F or G button to select an item, press the I or H button to change the settings, and press the ENTER button for confirmation.

Press the C.C.M button.

PROFILE

BRetrieves the saved profile (colour settings which have been adjusted).

NORMAL When projecting images according to the setting of “PICTURE MODE” (page 33). This setting is the factory default setting.

USER1/2/3 These items are displayed only when “PROFILE SAVE” has been carried out. Refer to page 39 for details.

EDIT

BYou can edit the settings for the selected colour.

CURSOR	Lets you select a colour, and adjust the colour settings
	(page 37).
LOG	Lets you adjust the colour settings again, or delete the

settings (page 38).

PROFILE SAVE Lets you save the adjusted colour settings (page 39).

NOTE:

BRefer to page 65 for the general arrangement of the “COLOUR MANAGEMENT” menu.

BYou can enter the “COLOUR MANAGEMENT” menu from the “ADVANCED MENU” in the “PICTURE” menu (page 46).

BWhen the “PICTURE MODE” menu is selected, the settings will switch automatically to the last “PROFILE” settings that were used for the selected picture mode.

BWhen retrieving a profile, “EDIT” will not be displayed if the picture mode being selected does not match the picture mode which had been selected when that profile was saved.

B“LOG” and “PROFILE SAVE” are displayed only when the colours have been adjusted in “CURSOR” menu.

CURSOR

Press the ENTER button to display the cursor (B).

#Select the colour you want to adjust with the cursor.

BPress the F, G, I and H buttons to move the cursor, and then press the ENTER button.

BThe selected colour (C) and the adjustment menu (A) will be displayed.

$Adjust the items in the adjustment menu.
BThe colour adjusted in the adjustment menu (D) will be displayed.		functions
%Press the ENTER button to apply the adjusted colour.
COLOUR	Adjusts the deepness of the colour.
TINT	Adjusts the hue of the colour.
BRIGHT	Adjusts the brightness of the colour.
BThe letters PROCESSING and the progress status bar will be displayed		Useful
while the adjusted colour is applied.

BThe adjusted colour settings will be saved in the “LOG” menu.

If you would like to continue to adjust another colour after adjusting a colour, press the MENU button or the RETURN button on the remote control unit, and then repeat the steps from step #.

A

B
C˛ D˛	Screen

&Press the MENU button or the RETURN button on the remote control unit twice, and then save the adjusted colour settings.

BSelect the “PROFILE SAVE” menu from the “EDIT” menu. The adjusted colour settings will not be saved until you carry out “PROFILE SAVE”.

36-ENGLISH ENGLISH-37