Panasonic pt-ae900e manual Precautions with regard to safety

Precautions with regard to safety

WARNING

If you notice smoke, strange smells or noise coming from the projector, disconnect the mains plug from the mains socket.

BDo not continue to use the projector in such cases, otherwise fire or electric shocks could result.

BCheck that no more smoke is coming out, and then contact an Authorised Service Centre for repairs.

BDo not attempt to repair the projector yourself, as this can be dangerous.

Do not install this projector in a place which is not strong enough to take the full weight of the projector.

BIf the installation location is not strong enough, it may fall down or tip over, and severe injury or damage could result.

Installation work (such as ceiling suspension) should only be carried out by a qualified technician.

BIf installation is not carried out correctly, there is the danger that injury or electric shocks may occur.

If foreign objects or water get inside the projector, or if the projector is dropped or the cabinet is broken, disconnect the mains plug from the mains socket.

BContinued use of the projector in this condition may result in fire or electric shocks.

BContact an Authorised Service Centre for repairs.

Do not overload the mains socket.

BIf the power supply is overloaded (for example, by using too many adapters), overheating may occur and fire may result.

Do not remove the cover or modify it in any way.

BHigh voltages can cause fire or electric shocks.

BFor any inspection, adjustment and repair work, please contact an Authorised Service Centre.

Clean the mains plug regularly to prevent it from becoming covered in dust.

BIf dust builds up on the mains plug, the resulting humidity can damage the insulation, which could result in fire. Pull the mains plug out from the mains socket and wipe it with a dry cloth.

BIf not using the projector for an extended period of time, pull the mains plug out from the mains socket.

Do not do anything that might damage the mains lead or the mains plug.

BDo not damage the mains lead, make any modifications to it, place it near any hot objects, bend it excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.

BIf the mains lead is used while damaged, electric shocks, short-circuits or fire may result.

BAsk an Authorised Service Centre to carry out any repairs to the mains lead that might be necessary.

Do not handle the mains plug with wet hands.

BFailure to observe this may result in electric shocks.

Insert the mains plug securely into the mains socket.

BIf the plug is not inserted correctly, electric shocks or overheating could result.

BDo not use plugs which are damaged or mains sockets which are coming loose from the wall.

Do not place the projector on top of surfaces which are unstable.

BIf the projector is placed on top of a surface which is sloped or unstable, it may fall down or tip over, and injury or damage could result.

Do not place the projector into water or let it become wet.

BFailure to observe this may result in fire or electric shocks.

Do not place liquid containers on top of the projector.

BIf water spills onto the projector or gets inside it, fire or electric shocks could result.

BIf any water gets inside the projector, contact an Authorised Service Centre.

Do not insert any foreign objects into the projector.

BDo not insert any metal objects or flammable objects into the projector or drop them onto the projector, as doing so can result in fire or electric shocks.

Do not allow the + and - terminals of the batteries to come into contact with metallic objects such as necklaces or hairpins.

BFailure to observe this may cause the batteries to leak, overheat, explode or catch fire.

BStore the batteries in a plastic bag and keep them away from metallic objects.

During a thunderstorm, do not touch the projector or the cable.

BElectric shocks can result.

Do not use the projector in a bath or shower.

BFire or electric shocks can result.

Preparation

6-ENGLISH ENGLISH-7