Panasonic pt-ae900e manual Lamp unit replacement period

Page 29

Cleaning and replacing the air filter

Replacing the lamp unit

If the air filter becomes clogged with dust, the internal temperature of the projector will rise, the TEMP indicator will illuminate and the projector’s power will turn off (the TEMP indicator will flash after the power is turned off).

The air filter should be cleaned every 100 hours of use.

Warning

When replacing the lamp, allow it to cool for at least one hour before handling it.

Lamp unit replacement period

The lamp is a consumable product. Even when the full life of the bulb has

#Turn off the MAIN POWER switch and disconnect the mains plug from the mains socket.

Turn off the MAIN POWER switch according to the procedure given in “Turning off the power” on page 28 before disconnecting the mains plug from the mains socket.

$Gently turn the projector upside down.

NOTE:

BPlace the projector on top of a soft cloth so that it will not become scratched.

%Remove the air filter.

Put your fingernails under the air filter and pull the air filter out of the projector.

&Clean the air filter.

Use a vacuum cleaner to clean off any accumulated dust.

'Install the air filter.

NOTE:

BBe sure to install the air filter before using the projector. If the projector is used without the air filter installed, dust and other foreign particles will be drawn into the projector, and malfunctions will result.

BIf the dust cannot be removed by cleaning, it is time to replace the air filter. Please consult your dealer. Furthermore, if the lamp unit is being replaced, replace the air filter at this time also.

BThe lamp cover gets very hot, and touching it can cause burns.

Notes on replacing the lamp unit

BThe light generating lamp is made of glass, so dropping it or allowing it to hit hard objects may cause it to burst. Be careful when handling the lamp.

BDispose of the removed old lamp with the same care that would be taken with a fluorescent light.

BA Phillips screwdriver is necessary for removing the lamp unit.

NOTE:

BThe projector is not supplied with a replacement lamp unit. Please ask your dealer for details. Lamp unit product no.: ET-LAE900

CAUTION:

BDo not use any lamp unit other than the one with the product number indicated above.

not been exhausted, the brightness of the light will gradually decline. Therefore periodic replacement of the lamp is necessary.

The intended lamp replacement interval is 3 000 hours, but it is possible that the lamp may need to be replaced earlier due to variables such as a particular lamp’s characteristics, usage conditions and the installation environment.

Early preparation for lamp replacement is encouraged.

The lamp will automatically shut off after approximately 30 minutes when 3 000 hours of use have been reached because of a much greater chance of it exploding after this time.

NOTE:

BThe usage hours explained

above are for when “LAMP

POWER” in the “OPTION”

menu has been set to “HIGH”

and when “DYNAMIC IRIS” in

the “PICTURE” menu has

been set to “ON”. When

“LAMP POWER” has been set

to “HIGH” and “DYNAMIC

IRIS” has been set to “OFF”,

the usage hours will be 2 000

hours. If “LAMP POWER” is

set to “LOW”, the brightness of

the lamp will be less and life of

the lamp can be extended.

BWhile 3 000 hours is the

intended replacement interval,

Care and maintenance

Air filter

it is not a period of time

covered by warranty.

56-ENGLISH

ENGLISH-57

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Model No. PT-AE900E LCD ProjectorPreparation Dear Panasonic CustomerContents Precautions with regard to safety Do not look into the lens while the projector is being used Do not put your weight on this projectorDo not cover the air inlet port or the air outlet port Always disconnect all cables before moving the projectorBefore use AccessoriesLocation and function of each part Power input socket AC # Connector panel $ Air inlet portLamp unit cover Main Power switch pages 26 $ Hdmi in connectorProjector control panel Remote control unitProjection methods Setting-upProjector position Projection distancesBProjector setting up range in relation to the screen Setting up range using the lens shift functionBVertical lens shift BHorizontal lens shiftConnecting to equipment compatible with Hdmi Connecting to video equipmentConnections StartedOperating range Connecting to computerTurning on the power #Press the Power button Turning off the powerPower indicator Projector statusSetting the aspect ratio Aspect Press the Light button Press the PIC. Mode buttonNatural Displaying the Picture menu Main Turning off the picture momentarily ShutterDisplaying the Advanced Menu UsefulCursor ProfileEdit LOG Profile SaveMenu screens On-screen menusMenu operation guide Returning a setting to the factory defaultAdjusting the picture TV-SYSTEM Signal ModeAdvanced Menu Memory SaveAdjusting the position Changing the display language Option settingsLamp Power OFF TimerBack Colour Startup LogoLamp indicator Lamp indicator Temp indicatorLamp Power RemedyLamp unit replacement period Lamp unit replacement procedure Cleaning and maintenance Before calling for serviceRemote control unit Power supply Operating range SpecificationsGeneral arrangement of the Colour Management menu List of compatible signalsControl commands Using the Serial connectorPin assignments and signal names ConnectionProjection dimensions calculation methods DimensionsInquiry commands Cable specificationsFor business users in the European Union Trademark acknowledgements
Related manuals
Manual 10 pages 1.62 Kb

pt-ae900e specifications

The Panasonic PT-AE900E is a high-performance home theater projector that delivers an impressive combination of advanced technologies and user-friendly features. Known for its exceptional image quality, this projector is ideal for film enthusiasts and gamers alike.

One of the standout features of the PT-AE900E is its 720p resolution, which provides a clear, detailed picture that brings movies and games to life. It utilizes a three-LCD technology, ensuring vivid colors and sharp contrasts. This system minimizes the "rainbow effect" commonly associated with single-chip DLP projectors, making it a preferred choice for viewers sensitive to this phenomenon.

The projector boasts a brightness level of 1,600 ANSI lumens, which makes it suitable for various lighting conditions. Whether you're watching during daylight or in a darkened room, the PT-AE900E maintains a consistent image quality, allowing users to enjoy their content without compromise.

Another notable characteristic is its contrast ratio of 10,000:1. This impressive ratio enables deep blacks and bright whites, enhancing the overall viewing experience. The dynamic iris technology further enhances contrast by automatically adjusting the lens opening based on the scene's brightness, thus producing richer images.

Connectivity options are ample with the PT-AE900E. It features multiple inputs, including HDMI, component video, and S-Video. This versatility allows users to connect various devices, from Blu-ray players to gaming consoles, making it a flexible option for any home theater setup.

Panasonic has also integrated a low-noise design into the PT-AE900E, ensuring that the projector operates quietly even during extended viewing sessions. This feature helps to maintain an immersive experience without disruptive background noise.

The lens of the projector is equipped with a 2x optical zoom and a wide lens shift range, allowing for flexible installation options. This means that users can adjust the placement without compromising image quality or requiring extensive renovations.

In summary, the Panasonic PT-AE900E combines outstanding image quality, flexible connectivity, and quiet operation, making it a compelling choice for home theater enthusiasts. Whether you're enjoying the latest blockbuster or engaging in immersive gaming sessions, this projector delivers an exceptional visual experience that is hard to beat.
Top Page Image Contents