Panasonic PT-AX100U Adjusting the image, Setting your own color profile, Create a new profile

Basic Operation

Remote control operation

Adjusting the image

You can display one of the PICTURE or

ADVANCED menu items by pressing

the PICTURE ADJUSTMENT button.

Press the button to switch between PICTURE and ADVANCED menu. Press F G to select the required menu item and I H to adjust.

PICTURE menu items

PICTURE MODE, CONTRAST, BRIGHTNESS, COLOR, TINT, SHARPNESS, COLOR TEMPERATURE and DYNAMIC IRIS

ADVANCED menu items

GAMMA, CONTRAST, BRIGHTNESS, COLOR MANAGEMENT, NR, MPEG NR, CINEMA REALITY and TV-SYSTEM

NOTE:

For each menu items description, see “Menu Navigation” on page 26.

The screen will be cleared after 7 seconds without any operation.

Setting your own color profile

You can adjust a selected color individually and save and retrieve under the PICTURE MODE setting. Press the COLOR MANAGEMENT button to open the menu.

PROFILE NORMAL

CURSOR

LOG

PROFILE SAVE

Create a new profile

Adjusting the selected color

Select a color and adjust COLOR, TINT and

BRIGHTNESS.

1.Select the CURSOR menu and press

ENTER.

The projected image is captured, and the target cursor is displayed.

When the LOG is fully stored, the target cursor will not be displayed. See "Managing stored logs" on page 25.

Target cursor

2.Move the cursor with F G I and H to the required place to select a color and press

ENTER.

The color at the center of the target cursor is sampled and the sample box is displayed on the left of the cursor. The menu items are displayed on the upper part of the screen.

CURSOR

	RETURN	COLOR
SELECT	ENTER	TINT
		BRIGHTNESS
DEFAULT

Sampled color

3.Select a menu item and the I H to adjust each item level.

The result box is displayed on the right of the cursor and shows the adjusted color.

CURSOR
	RETURN	COLOR
SELECT	ENTER	TINT
		BRIGHTNESS
DEFAULT
		Adjusted color

24 - ENGLISH