Panasonic PT-AX100U Temp and Lamp Indicators, Controlling alerts, Lamp indicator Temp indicator

Page 36

Maintenance

TEMP and LAMP Indicators

Controlling alerts

If a problem should occur with the projector, the TEMP and/or LAMP indicators will alert you. Respond to the alert as follows.

1.Confirm the POWER indicator status and turn off the projector in the proper way.

2.Find out the cause of the problem.

3.Follow the instructions for each indication below and solve the problem.

4.Turn on the projector in the correct way and confirm the indicator is not indicating a problem any longer.

NOTE:

If no problem is found or the problem remains, do not turn on the projector. Instead contact an Authorized Service Center.

LAMP indicator

TEMP indicator

TEMP indicator

Indicator and

Illuminating RED and still projecting

 

 

projector

Flashing RED and POWER is turned off

 

 

 

 

 

Problem

The temperature inside and/or outside the projector is abnormally high.

 

 

 

 

 

Cause

The ventilation ports are

The room temperature is too

The Air filter is excessively

covered.

high.

 

dirty and the ventilation is

 

 

poor.

 

 

 

 

 

Remove the object(s) from

Reinstall the projector at a

Clean or replace the Air filter

 

in the proper way. See

Remedy

the ventilation ports or clear

temperature controlled place.

“Cleaning the Air filter” on

 

around the projector.

See “Setting up” on page 14.

page 37.

 

 

 

 

LAMP indicator

 

 

 

 

 

 

 

 

Indicator

Illuminating RED

 

Flashing RED

 

 

 

 

Problem

LAMP RUNTIME has reached 1 800 hours

LAMP circuit failure or abnormal function.

(with LAMP POWER set to NORMAL).

 

 

 

Cause

Lamp unit will run out soon and needs to be

The projector is switched off incorrectly.

 

replaced.

 

 

 

 

 

 

Let the LAMP cool down and turn on the

Remedy

Replace the Lamp unit. See “Before

projector.

 

replacing the Lamp unit” on page 38.

If the POWER does not turn on, contact an

 

 

 

 

Authorized Service Center.

 

 

 

 

 

36 - ENGLISH

Image 36
Contents Operating Instructions Important Safety Notice Dear Panasonic CustomerImportant Safety Notice PanasonicContents Settings MaintenanceAppendix Precautions with regard to safety Precautions with regard to safety Do not look into the lens while the projector is being usedDo not put your weight on this projector Do not cover the air inlet port or the air outlet portAlways disconnect all cables before moving the projector Do not place any heavy objects on top of the projectorAccessories Before useOrder to get the best picture quality Do not touch the surfaces of the lens with your bare handsScreen LampRemote control About Your ProjectorFront, back and top view Projector Top and front viewControl panel Protects the Projection lens from dust or dirtConnecting Back and bottom viewTerminals Setting up Calculation methods for screen dimensionsScreen size and throw distance Front leg adjuster and throwing angle Projection methodAdjusting the Shift lever Lens shift and positioningHorizontal shift Vertical shiftAdjustable projection range Projector location rangeAfter fixing the screen position Connecting with AV devices Connecting with HDMI/PCConnections Before connection to the projectorSwitching the projector on/off Power cordPower indicator ConnectingSwitching on the projector Switching off the projectorPower indicator Selecting the input signal Projecting an imagePositioning the image Focus ring Zoom ringRemote control operation Input switchingOperating range Capturing an imageSwitching the aspect ratio Switching off the projector automaticallyResetting to the factory default settings Switching the picture modeAdjusting the image Setting your own color profileCreate a new profile Saving a log setting as a profile Loading saved profilesManaging stored logs Menu Navigation Navigating throughMenu Main menuSub-menu Picture menuPosition menu Language menuPicture Mode Picture MenuContrast BrightnessColor Temperature TintSharpness Dynamic IrisSignal Mode Favourite SaveFavourite Load NR Noise ReductionClock Phase Position MenuPosition DOT ClockComponent signals AspectAspect ratio options and projection example Auto Setup Aspect ratio depend on signals WSS Over ScanOption Menu Installation Lamp PowerSleep AltitudeTemp and Lamp Indicators Lamp indicator Temp indicatorLamp indicator Controlling alertsCare and Replacement Before cleaningCleaning your projector When to replace the Lamp unit Before replacing the Lamp unitIndication Over 1 800 hoursResetting the Lamp Runtime Replacing the lamp unitReplacing Troubleshooting List of compatible signals Technical InformationPin assignments and signal names Communication settingsPin No Signal name Contents Serial terminalControl commands Basic formatInquiry commands Cable specificationsProjector Menu structure Picture Menu 28 HPosition Menu 31 H Option Menu 34 HSpecifications NTSC/NTSC 4.43/PAL/PAL-M/PAL-N/SECAMSerial Dimensions Trademark acknowledgements Index Air intake portIndex
Related manuals
Manual 52 pages 37.1 Kb