Panasonic PT-AX100U manual Projecting an image, Selecting the input signal, Positioning the image

Page 21

Projecting an image

Selecting the input signal

1. Switch on the connected devices.	2. Press the INPUT SELECT button to select the
Press the play button of the required device.	required input method if needed.See "Input
	switching" on page 22.
	The image will be projected on the screen.

NOTE:

AUTO SEARCH is ON as default and the signal from the connected devices is detected automatically. See "AUTO SEARCH" on page 34.

Positioning the image

1.Press ASPECT to select the required aspect mode. See "ASPECT" on page 32.

2.Adjust the projected image with the Shift lever. See "Lens shift and positioning" on page 16.

4.Adjust the focus and the projected image size.

Turn the Focus ring and Zoom ring to adjust the image.

You can confirm the result with TEST PATTERN.

Operation

Focus ring

Zoom ring

Unlock

3. Adjust the angle of the projector.

Screw down the Front leg adjuster and adjust the angle vertically.

NOTE:

Do not touch the Air exhaust port as this may cause burns or injury.

If keystone distortion occurs, see “KEYSTONE” on page 33.

Basic

ENGLISH - 21

Image 21

Contents Operating Instructions Dear Panasonic Customer Important Safety NoticePanasonic Important Safety NoticeContents Settings MaintenanceAppendix Precautions with regard to safety Do not look into the lens while the projector is being used Precautions with regard to safetyDo not cover the air inlet port or the air outlet port Do not put your weight on this projectorAlways disconnect all cables before moving the projector Do not place any heavy objects on top of the projectorBefore use AccessoriesDo not touch the surfaces of the lens with your bare hands Order to get the best picture qualityScreen LampRemote control About Your ProjectorFront, back and top view Top and front view ProjectorControl panel Protects the Projection lens from dust or dirtConnecting Back and bottom viewTerminals Setting up Calculation methods for screen dimensionsScreen size and throw distance Projection method Front leg adjuster and throwing angleLens shift and positioning Adjusting the Shift leverHorizontal shift Vertical shiftAdjustable projection range Projector location rangeAfter fixing the screen position Connecting with HDMI/PC Connecting with AV devices Connections Before connection to the projectorPower cord Switching the projector on/offPower indicator ConnectingSwitching on the projector Switching off the projectorPower indicator Projecting an image Selecting the input signalPositioning the image Focus ring Zoom ringInput switching Remote control operationOperating range Capturing an imageSwitching off the projector automatically Switching the aspect ratioResetting to the factory default settings Switching the picture modeAdjusting the image Setting your own color profileCreate a new profile Saving a log setting as a profile Loading saved profilesManaging stored logs Navigating through Menu NavigationMenu Main menuPicture menu Sub-menuPosition menu Language menuPicture Menu Picture ModeContrast BrightnessTint Color TemperatureSharpness Dynamic IrisFavourite Save Signal ModeFavourite Load NR Noise ReductionPosition Menu Clock PhasePosition DOT ClockComponent signals AspectAspect ratio options and projection example Aspect ratio depend on signals Auto SetupWSS Over ScanOption Menu Lamp Power InstallationSleep AltitudeLamp indicator Temp indicator Temp and Lamp IndicatorsLamp indicator Controlling alertsCare and Replacement Before cleaningCleaning your projector Before replacing the Lamp unit When to replace the Lamp unitIndication Over 1 800 hoursResetting the Lamp Runtime Replacing the lamp unitReplacing Troubleshooting Technical Information List of compatible signalsCommunication settings Pin assignments and signal namesPin No Signal name Contents Serial terminalBasic format Control commandsInquiry commands Cable specificationsProjector Picture Menu 28 H Menu structurePosition Menu 31 H Option Menu 34 HNTSC/NTSC 4.43/PAL/PAL-M/PAL-N/SECAM SpecificationsSerial Dimensions Trademark acknowledgements Air intake port IndexIndex

Related manuals

Manual 52 pages 37.1 Kb