Outlaw Audio RR 2150 owner manual Setting Sleep Timer, Using the AM/FM Tuner

Page 20

Owner’s Manual

Operation

Setting Sleep Timer

The RR 2150’s sleep timer automatically shuts the unit off after a predetermined amount of time.

To activate the sleep timer:

1.Press the remote control’s Sleep button (RC6).

The front panel display will show “Sleep” and the number of minutes until the unit shuts off immediately below the word “Sleep.”

2.Press the Sleep button repeatedly until you’ve chosen the amount of “sleep time” you want.

The available choices are:

75MIN60MIN45MIN30MIN20MIN15MIN10MIN5MINOFF

Using the AM/FM Tuner

The RR 2150’s AM/FM/FM stereo is exceptionally flexible and user-friendly. It is, however, the only source that must be set up to match your listening preferences. Once you’ve followed the simple steps shown in the following pages, you’ll be able to easily enjoy your favorite AM, FM, and FM stereo broadcasts.

Selecting Tuner Mode

To select the tuner from the front panel:

1.Turn the Source Selector (FP17) until the desired band (AM or FM) appears in the front panel display.

2.Using the Up and Down tuning buttons (FP6 and FP7 respectively), tune to the station you want to listen to.

To select the tuner from the remote control:

1.Press the RR device control button (RC2) on the remote control.

2.Press the AM/FM button (RC12) until the desired band appears in the front panel display.

3.Press the Channel Up and Down buttons (RC18 and RC19) to select the desired station.

To select AM or FM when the tuner is already in use with the Source selector:

nTurn the Source selector (FP17) until the correct band appears in the front panel display.

To select AM or FM when the tuner is already in use with the Function button:

1.Press the Function button on the front panel (FP8) or the remote control (RC21) once.

“Band” appears in the front panel display, the Function button’s blue LED lights and the Enter button’s red LED blinks.

2.Press Enter on the front panel (FP9) or the remote control (RC17).

The red LED on the Enter button will go out and the blue LED on the Function button will continue to glow.

3.Use the Up or Down tuning button on the front panel (FP6/FP7) or on the remote control (RC18/RC19) until you’ve made your choice.

The selected band appears in the front panel display.

4.Press Enter again.

The blue LED on the Function button will extinguish.

Obviously, using the Source selector is far easier and you’ll probably use this method most of the time. The reason we began with the Function button is that it lets you access other benefits, as described below.

Tuning a Station and The Tuning Mode

The RR 2150’s Tune Mode function lets you choose between Manual and Auto tuning modes.

Manual Tuning This mode uses the Up or Down tuning buttons to take you to the next lower or higher frequency regardless of whether or not that frequency carries a broadcast. In this mode, FM stations are tuned regardless of whether the broadcast is mono or stereo.

Auto Tuning This mode uses the Up or Down tuning buttons to advance to the next higher (or lower) frequency in the band you’ve selected that has a signal strong enough for acceptable reception. In this mode only FM stations broadcasting stereo signals are tuned.

To select the desired tuning mode using the Function button:

1.Press the Function button on the front panel (FP8) or the remote control (RC21) twice.

“T MODE” appears in the front panel display, the Function button’s blue LED lights and the Enter button’s red LED blinks.

2.Press Enter on the front panel (FP9) or the remote control (RC17).

The red LED on the Enter button will go out and the blue LED on the Function button will continue to glow.

3.Use the Up or Down tuning button on the front panel (FP6/FP7) or the remote control (RC18/RC19) to toggle between the two modes.

The word “Auto” will appear in the front panel display above “T Mode” when Auto tuning is selected. The display will remain blank if Manual tuning is selected.

4. Press the Enter button again.

The front panel display will show the currently tuned broadcast fre- quency.

FM Tuner Mode

To change the FM tuner mode (mono or stereo):

nPress TUNER MODE on the remote control (RC13) to select the desired tuner mode.

STEREO will tune stereo signals.

MONO will tune either mono or stereo signals. When a station’s signal is weak in the STEREO mode, selecting mono will often provide a signal that is more acceptable by switching to the mono sound mode.

Direct Tuning

You may tune up or down through the AM or FM bands using the Up/Down tun- ing controls on the front panel or remote, but sometimes you may wish to tune a station directly. That is easy to do on the RR 2150 by following these steps:

Once you’ve entered the complete frequency, the tuner will automatically tune to it

20

Outlaw Audio

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Stereo RetroReceiver When the power-supply cord or plug is damaged Please Read FirstPower Cord Handle the AC Power Cord GentlyWiring Installation LocationTable of Contents Unpacking Quick Guide to the RR 2150’s FeaturesAccessories RR 2150 Front Panel Turn this knob to control headphone volume RR 2150 Rear PanelConnect the supplied AM loop antenna to these terminals Plug your turntable’s output cables into these jacksRP15 Bass Management selector switch see RP18 Subwoofer line level output see pagesRP20 AC socket see RP14 External Processor Loop connections see pages 11Remote Control Press these buttons to raise or lower the volumeConnecting Your RR Connecting and Using AntennasFM Antenna AM AntennaConnecting Source Components Connecting Audio Equipment to the RR Loudspeaker Connections GaugeSpeaker Connections Physical ConnectionConnecting Loudspeakers to the RR Subwoofers and Bass Management Settings Powered subwoofersBass Management Passive non-amplified subwooferVolt Trigger AC power connectionExternal Amplifier Connections Option Operation Adjusting Tone Controls Balance AdjustmentUsing Headphones RecordingSetting Sleep Timer Using the AM/FM TunerMEM will blink in the front panel display Current frequency will go blank on the front panel displayTuner will automatically tune to the new frequency Programming the Remote Control Setup Using Preprogrammed CodesSome General Comments on Using Your Remote Searching for Unknown CodesCare and Maintenance TroubleshootingCleaning When You’re AwaySetup Codes Cable ConvertersTelevisions VCRs RR 2150 Specifications Audio SectionFM Tuner Section AM Tuner SectionOutlaw Audio Limited Warranty T l a w a u d i o

RR 2150 specifications

Outlaw Audio has made a significant mark in the home audio industry with its innovative and competitive products, and the RR 2150 receiver is no exception. This versatile stereo receiver is designed to provide audiophiles with an exceptional listening experience, combining modern technology and classic design.

The RR 2150 is a 2-channel receiver that delivers a power output of 110 watts per channel at 8 ohms, ensuring that it can drive a wide range of speakers with ease. This high power output allows for dynamic sound reproduction, perfect for both music lovers and cinema enthusiasts seeking an immersive audio experience. With a frequency response range of 10 Hz to 100 kHz, it covers all critical audio frequencies, providing clarity and detail across the spectrum.

One of the standout features of the RR 2150 is its impressive connectivity options. It offers multiple analog inputs, allowing users to connect various audio sources such as phono, CD players, and other line-level components. Additionally, it includes an integrated high-quality phono preamp, making it an excellent choice for vinyl enthusiasts. The receiver also features a built-in FM tuner, giving users access to their favorite radio stations without needing additional equipment.

The RR 2150 emphasizes user-friendly operation with its intuitive controls and display. The front panel includes a large volume knob, input selector, and tone controls, providing easy access to essential functions. The remote control further enhances convenience, allowing users to manage their audio setup from anywhere in the room.

Incorporating advanced technology, the RR 2150 utilizes a robust power supply and high-quality components to minimize distortion and improve overall sound quality. The construction is solid, featuring a durable chassis that helps reduce interference and vibration, ensuring that audio clarity remains unblemished.

With its blend of modern functionality and vintage aesthetics, the Outlaw Audio RR 2150 serves not only as a high-performance audio receiver but also as a visually appealing addition to any home theater or stereo setup. Its signature sound quality, coupled with its versatility and user-friendly features, makes it a standout choice for those looking to enhance their audio experience.
Top Page Image Contents