To enter a frequency (station) directly:
1.Press DIRECT on the remote control (RC19).
The current frequency will go blank on the front panel display.
2.Use the 10 numeric keys on the remote control (RC3) to enter the desired frequency.
For example, to enter 89.3 FM, simply punch in 893. The numbers will appear on the front panel display as you key them in.
The tuner will automatically tune to the new frequency.
Memorizing Your Favorite Stations
Once you have tuned to a station, you may enter it into the RR 2150’s memory so that it may be easily recalled for future listening. The tuner memory holds up to 39 stations in any order you choose – it even intermixes FM and AM frequencies.
Note: Although you can use the front panel controls to program your favorite stations, we suggest that you use the remote control as it is more convenient. Using the front panel controls may result in the inter- nal microprocessor picking an arbitrary preset number that you might find inconvenient or confusing.
To program stations into memory using the remote control:
1.Tune to the AM or FM station you want the RR 2150 to memorize.
2.Press the Memory button on the remote control (RC27).
“MEM” will appear in the front panel display in small orange letters immediately above the chosen frequency.
If any station presets have already been entered, you’ll see a number immediately below the word “PRESET” in the front panel display.
3.Within 5 seconds, enter a two-digit memory number (from 01 to 39) using the remote control’s numeric keypad (RC3).
The word “PRESET” will appear above and to the right of the frequency readout and the number of that preset will appear directly below.
If a station preset already existed, it is replaced by the new number.
4.Repeat these steps for any additional stations, up to a total of 39.
To program stations into memory using the Function button:
1.Press the Function button on the front panel (FP17) or remote control (RC21) as many times as needed until “MEM,” “PRESET” and a preset number appear in the front panel display.
The blue LED in the Function button will light and the red LED in the Enter button will blink.
2.Press Enter on the front panel (FP9) or the remote control (RC17).
“MEM” will blink in the front panel display.
3.Press ENTER again to accept the current preset number.
OR
Press the Up or Down buttons on the front panel (FP6/FP7) or remote control (RC 18/RC19) until the desired number appears.
4.Within 5 seconds, press the Enter button to memorize the new station preset number.
Owner’s Manual
Operation
Tuning a Preset Station
Once a station’s frequency is entered into the RR 2150’s memory, it is easy to recall the station or scan through the list of preset stations.
To select a preset station:
nWith tuner selected as your source, enter the two digit preset number of the desired station using the 10 numeric keys on the remote control (RC3).
Preset Tune
You manually tune to the stations you’ve already programmed into the RR 2150’s memory. You may do this from either the remote or the front panel.
To manually scan through your preset stations:
nWith tuner selected as your source, press the Preset Up or Preset Down buttons on the remote control (RC23 and RC24) until the desired station is heard.
OR
1.Press the Function button on the front panel (FP8) or remote control ((RC21) until “P TUNE” appears in the front panel display.
The blue LED of the Function button’s lights. The red LED of the Enter button blinks.
2.Press Enter on the front panel (FP9) or the remote control (RC17).
The red LED of the Enter button will go out. The blue LED of the Func- tion button will continue to glow.
3.Press either the Up or Down buttons on the front panel (FP6/FP7) or remote control (RC18/RC19) to scroll through the list of preset stations.
Preset Scan
When you don’t remember exactly which preset station you want to listen to and don’t want to go to the trouble of manually tuning in all your presets, you can let the RR 2150 do it for you by automatically scanning your favorite stations.
To automatically scan your preset stations using the P.Scan button:
1.With tuner selected as your source, press the P.Scan button on the remote control (RC24).
The tuner will scan up through the list of stations, stopping at each one for five seconds.
2.Press the P.Scan button again when the desired station is playing.
To automatically scan through your preset stations using the Func- tion button:
1.Press the Function button on the front panel (FP8) or remote control (RC21) until “P SCAN” appears in the front panel display
The blue LED of the Function button’s lights. The red LED of the Enter button blinks.
2.Press Enter on the front panel (FP9) or the remote control (RC17).
The red LED on the Enter button will go out. The blue LED on the Func- tion button will continue to glow.
The RR 2150 will begin to scan your presets, stopping at each memorized station for five seconds.
3.Press the Enter button again when you reach the desired preset.
