Outlaw Audio RR 2150 Specifications, Audio Section, FM Tuner Section, AM Tuner Section

Page 27

Owner’s Manual

RR 2150 Specifications

RR 2150 Specifications

Audio Section

Continuous Average Power

100 Watts/channel (8Ω, 20Hz to 20kHz, <0.03% THD)

both channels driven

160 Watts/channel (4Ω, 20Hz to 20kHz, <0.03% THD)

 

 

 

Input Sensitivity/Impedance

 

 

 

 

 

High Level

200mV/47kΩ

 

 

 

 

MM Phono

3.3mV/47kΩ

 

 

 

 

MC Phono

0.6mV/47kΩ

 

 

 

Bass Management

 

 

 

 

 

High-Pass Slope

Adjustable 60Hz/80Hz/100Hz/Bypass

 

 

12 dB/octave (2nd order)

 

 

 

 

Low-Pass Slope

12dB/octave (2nd order)

 

 

Tone Control

 

 

 

 

 

Bass Center Frequency/Range

50Hz ± 6.5dB

 

 

 

 

Treble Center Frequency/Range

1KHz ± 6.5db

 

 

Frequency Response @ 1W

20Hz to 20kHz (+ 0dB/– 0.5dB)

 

 

S/N Ratio (IHF-A)

96dB unweighted

 

 

Transient IMD

Unmeasurable

FM Tuner Section

Frequency Range

87.5 – 108MHz

 

 

 

Usable Sensitivity (IHF)

12dBf

 

 

 

S/N Ratio

 

 

 

 

 

Mono

75dB

 

 

 

 

Stereo

70dB

 

 

Stereo Distortion

0.24%

 

 

Stereo Separation @ 19kHz

37dB

 

 

Selectivity

70dB ±10kHz

AM Tuner Section

Frequency Range

530 – 1710kHz

 

 

Usable Sensitivity

500V/M

 

 

S/N Ratio

>54dB

 

 

Selectivity

>25dB ±10kHz

General

Supply Voltage

120V, 60Hz only

 

 

 

Power Consumption

 

 

 

 

 

Idle

5W

 

 

 

 

@ Full Load

400W max.

 

 

Trigger Output

Sequential Delay 50 mA @ 12 VDC

 

 

Dimensions (W x H x D)

17.1 x 5.75 x 15.0 inches

 

 

Weight

27 lbs.

All features and specifications are subject to change without notice or liability to upgrade existing units.

Outlaw Audio and the Outlaw Audio logo are registered trademarks of Outlaw Audio, LLC. Any trademark not acknowledged is recognized as the property of the respective owner.

RR 2150 Stereo RetroReceiver

27

Image 27
Contents Stereo RetroReceiver Please Read First When the power-supply cord or plug is damagedInstallation Location Power CordHandle the AC Power Cord Gently WiringTable of Contents Quick Guide to the RR 2150’s Features AccessoriesUnpacking RR 2150 Front Panel Plug your turntable’s output cables into these jacks Turn this knob to control headphone volumeRR 2150 Rear Panel Connect the supplied AM loop antenna to these terminalsRP14 External Processor Loop connections see pages 11 RP15 Bass Management selector switch seeRP18 Subwoofer line level output see pages RP20 AC socket seePress these buttons to raise or lower the volume Remote ControlAM Antenna Connecting Your RRConnecting and Using Antennas FM AntennaConnecting Source Components Connecting Audio Equipment to the RR Physical Connection Loudspeaker ConnectionsGauge Speaker ConnectionsConnecting Loudspeakers to the RR Passive non-amplified subwoofer Subwoofers and Bass Management SettingsPowered subwoofers Bass ManagementAC power connection External Amplifier ConnectionsVolt Trigger Option Operation Recording Adjusting Tone ControlsBalance Adjustment Using HeadphonesUsing the AM/FM Tuner Setting Sleep TimerCurrent frequency will go blank on the front panel display Tuner will automatically tune to the new frequencyMEM will blink in the front panel display Searching for Unknown Codes Programming the Remote ControlSetup Using Preprogrammed Codes Some General Comments on Using Your RemoteWhen You’re Away Care and MaintenanceTroubleshooting CleaningCable Converters Setup CodesTelevisions VCRs AM Tuner Section RR 2150 SpecificationsAudio Section FM Tuner SectionT l a w a u d i o Outlaw Audio Limited Warranty

RR 2150 specifications

Outlaw Audio has made a significant mark in the home audio industry with its innovative and competitive products, and the RR 2150 receiver is no exception. This versatile stereo receiver is designed to provide audiophiles with an exceptional listening experience, combining modern technology and classic design.

The RR 2150 is a 2-channel receiver that delivers a power output of 110 watts per channel at 8 ohms, ensuring that it can drive a wide range of speakers with ease. This high power output allows for dynamic sound reproduction, perfect for both music lovers and cinema enthusiasts seeking an immersive audio experience. With a frequency response range of 10 Hz to 100 kHz, it covers all critical audio frequencies, providing clarity and detail across the spectrum.

One of the standout features of the RR 2150 is its impressive connectivity options. It offers multiple analog inputs, allowing users to connect various audio sources such as phono, CD players, and other line-level components. Additionally, it includes an integrated high-quality phono preamp, making it an excellent choice for vinyl enthusiasts. The receiver also features a built-in FM tuner, giving users access to their favorite radio stations without needing additional equipment.

The RR 2150 emphasizes user-friendly operation with its intuitive controls and display. The front panel includes a large volume knob, input selector, and tone controls, providing easy access to essential functions. The remote control further enhances convenience, allowing users to manage their audio setup from anywhere in the room.

Incorporating advanced technology, the RR 2150 utilizes a robust power supply and high-quality components to minimize distortion and improve overall sound quality. The construction is solid, featuring a durable chassis that helps reduce interference and vibration, ensuring that audio clarity remains unblemished.

With its blend of modern functionality and vintage aesthetics, the Outlaw Audio RR 2150 serves not only as a high-performance audio receiver but also as a visually appealing addition to any home theater or stereo setup. Its signature sound quality, coupled with its versatility and user-friendly features, makes it a standout choice for those looking to enhance their audio experience.