Outlaw Audio RR 2150 owner manual Remote Control, Press these buttons to raise or lower the volume

Page 9

Remote Control

RC1 Setup button (see page 22)

To begin programming the remote for command codes for a device, press this button for three seconds until the Indicator LED (RC15) lights.

RC2 Device control selector pushbuttons (see pages 20-22)

Press one of these buttons to select the component you want to control with the remote. Press RR to control the RR2150.

RC3 Numeric keypad buttons (0 thru 9) (see pages 20-22)

Press these buttons to enter numbers for different functions such as direct input of station frequencies for the internal tuner, and other numeric functions for products such as DVD and CD players. These buttons are also used to enter command codes when programming the remote.

RC4 Mute (see page 18)

Press this button to mute the receiver’s output. Another push restores volume to its previous level. The blue LED in the center of the front panel’s Mute button (FP19) lights whenever Mute is engaged.

RC5 Volume Up/Down pushbuttons (see page 18)

Press these buttons to raise or lower the volume.

RC6 Sleep (see page 20)

Press this button to activate the sleep function, which turns the RR 2150 off after a user-selectable amount of time.

RC7 Guide

This button has no function for the RR 2150. For other components, it will normally activate the information guide, if available, though the function may vary from device to device.

RC8 Cursor control buttons (menu navigation) (see pages 20-22)

RR2150: The Left and Right buttons have no function for the RR 2150. When the tuner is in use, the Up and Down buttons have the same func- tions as the front panel Up and Down buttons. Press these in conjunction with the Function and Enter buttons to adjust tuner functions.

Other components: For other devices these buttons will normally move the cursor in an on-screen menu up or change menu settings, though their function may vary from device to device.

RC9 Info button

This button has no function for the RR 2150. For other components, it will display an information menu, though the function may vary from device to device.

RC10 Transport Control buttons

These buttons have no function for the RR 2150. Use these buttons for components with transport and recording controls, such as a VCR. Their function may vary from device to device.

RC11 Source (or input) selector buttons (see pages 18-19)

Press the button corresponding to the name of the input you wish to select for listening. Pressing one of these buttons will also turn the RR 2150 on when it is in the Standby Mode.

RC12 AM/FM button (see pages 20-21)

Press this button to select the AM/FM tuner when using another source. Press it again to switch between AM/FM.

RR2150 Remote Control

RC

1

RC

2

RC

3

RC

4

RC

5

RC

6

RC

7

RC

8

RC

9

RC

10

RC

11

RC

12

RC

13

RC

14

Owner’s Manual

Remote Control

RC

15

RC

16

RC

17

RC

18

RC

19

RC

20

RC

21

RC

22

RC

23

RC

24

RR 2150 Stereo RetroReceiver

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Stereo RetroReceiver Please Read First When the power-supply cord or plug is damagedHandle the AC Power Cord Gently Power CordWiring Installation LocationTable of Contents Quick Guide to the RR 2150’s Features AccessoriesUnpacking RR 2150 Front Panel RR 2150 Rear Panel Turn this knob to control headphone volumeConnect the supplied AM loop antenna to these terminals Plug your turntable’s output cables into these jacksRP18 Subwoofer line level output see pages RP15 Bass Management selector switch seeRP20 AC socket see RP14 External Processor Loop connections see pages 11Press these buttons to raise or lower the volume Remote ControlConnecting and Using Antennas Connecting Your RRFM Antenna AM AntennaConnecting Source Components Connecting Audio Equipment to the RR Gauge Loudspeaker ConnectionsSpeaker Connections Physical ConnectionConnecting Loudspeakers to the RR Powered subwoofers Subwoofers and Bass Management SettingsBass Management Passive non-amplified subwooferAC power connection External Amplifier ConnectionsVolt Trigger Option Operation Balance Adjustment Adjusting Tone ControlsUsing Headphones RecordingUsing the AM/FM Tuner Setting Sleep TimerCurrent frequency will go blank on the front panel display Tuner will automatically tune to the new frequencyMEM will blink in the front panel display Setup Using Preprogrammed Codes Programming the Remote ControlSome General Comments on Using Your Remote Searching for Unknown CodesTroubleshooting Care and MaintenanceCleaning When You’re AwayCable Converters Setup CodesTelevisions VCRs Audio Section RR 2150 SpecificationsFM Tuner Section AM Tuner SectionT l a w a u d i o Outlaw Audio Limited Warranty

RR 2150 specifications

Outlaw Audio has made a significant mark in the home audio industry with its innovative and competitive products, and the RR 2150 receiver is no exception. This versatile stereo receiver is designed to provide audiophiles with an exceptional listening experience, combining modern technology and classic design.

The RR 2150 is a 2-channel receiver that delivers a power output of 110 watts per channel at 8 ohms, ensuring that it can drive a wide range of speakers with ease. This high power output allows for dynamic sound reproduction, perfect for both music lovers and cinema enthusiasts seeking an immersive audio experience. With a frequency response range of 10 Hz to 100 kHz, it covers all critical audio frequencies, providing clarity and detail across the spectrum.

One of the standout features of the RR 2150 is its impressive connectivity options. It offers multiple analog inputs, allowing users to connect various audio sources such as phono, CD players, and other line-level components. Additionally, it includes an integrated high-quality phono preamp, making it an excellent choice for vinyl enthusiasts. The receiver also features a built-in FM tuner, giving users access to their favorite radio stations without needing additional equipment.

The RR 2150 emphasizes user-friendly operation with its intuitive controls and display. The front panel includes a large volume knob, input selector, and tone controls, providing easy access to essential functions. The remote control further enhances convenience, allowing users to manage their audio setup from anywhere in the room.

Incorporating advanced technology, the RR 2150 utilizes a robust power supply and high-quality components to minimize distortion and improve overall sound quality. The construction is solid, featuring a durable chassis that helps reduce interference and vibration, ensuring that audio clarity remains unblemished.

With its blend of modern functionality and vintage aesthetics, the Outlaw Audio RR 2150 serves not only as a high-performance audio receiver but also as a visually appealing addition to any home theater or stereo setup. Its signature sound quality, coupled with its versatility and user-friendly features, makes it a standout choice for those looking to enhance their audio experience.
Top Page Image Contents