Panasonic PT-LC80E, PT-LC76E, PT-LC56E dimensions Option settings

Option settings

Use the F and G buttons on the projector or remote control unit to select an item, then press the I or

Hbuttons to change the setting.

	OPTION1
OSD				ON
AUTO	SIGNAL			ON
AUTO	KEYSTN			ON
AUTO	RGB	IN		ON
RGB2	SELECT			INPUT
RGB/YP B P R				AUTO
VGA60/525P				525P
SXGA	MODE			SXGA
BLACKBOARD				OFF
SELECT			ADJ	RETRN

	OPTION2
BACK	COLOR	BLUE
FRONT/REAR		FRONT
DESK/CEILING		DESK
FAN	CONTROL	STANDARD
LAMP	POWER	HIGH
LAMP	RUNTIME	100H
FUNC	1	INDEX

CONTROL	KEY	ON
AUTO POW	. OFF	DISABLE
SELECT	ADJ	RETRN

OSD

ON

The current input name is displayed in the top-right corner of the screen when the input signal is changed.

OFF

Use this setting when you do not want the current input name to be displayed.

AUTO SIGNAL

This should normally be set to ON.

ON

AUTO SETUP will be carried out automatically when the input signal is changed.

OFF

AUTO SETUP will not function when the input signal is changed.

AUTO KEYSTN

This should normally be set to ON.

ON

During automatic setup, the angle of tilt of the projector is detected and keystone distortion is corrected automatically.

OFF

Use this setting when you do not want automatic keystone correction to be carried out during automatic setup, such as when the screen itself is at an angle.

AUTO RGB IN

This should normally be set to ON.

ON

During automatic setup, the projector selects whichever one of the RGB1 IN or RGB2 IN connectors has a signal being input, and uses that signal for projection. (If a picture is being projected, the signal source is not automatically changed.)

OFF

Use this setting when you do not want the signal source to be changed automatically during automatic setup.

RGB2 SELECT

RGB2 SELECT INPUT

[

OUTPUT

This setting is used to select the function of the RGB2 IN/RGB1 OUT connector.

RGB/YPBPR

RGB/YP B P R	AUTO
	[�
	RGB
	[
	YP B P R

This should normally be set to AUTO. RGB or YPBPR is selected automatically depending on the synchronising signal status. When HDTV, 525p (480p), 525i (480i), 625i, 750p, and some VGA480 signals are being input, select “RGB” or “YPBPR” in accordance with the input signal.

VGA60/525P

VGA60/525P 525P

[

VGA60

When a VGA60 or 525p RGB signal is being input, select the signal in accordance with the input signal.

SXGA MODE

SXGA MODE	SXGA
	[
	SXGA+

This setting is only for an SXGA signal.

SXGA

Select this item normally.

SXGA+

When the projected image is contracted vertically, select this item.

BLACKBOARD (PT-LC80E only) Set to “ON” when PICTURE MODE is set to BLACK-BD. (Refer to page 35.)

BACK COLOR

BACK COLOR	BLUE
	[
	BLACK

This sets the colour which is projected onto the screen when no signal is being input to the projector.

FRONT/REAR

FRONT/REAR FRONT

[

REAR

This setting should be changed in accordance with the projector setting-up method.

Set to “FRONT” when using a normal reflective screen with the projector positioned in front of the screen, and set to “REAR” when using a translucent screen with the projector positioned behind the screen.

DESK/CEILING

DESK/CEILING DESK

[

CEILING

This setting should be changed in accordance with the projector setting-up method.

Set to “DESK” when setting up the projector on a desk or similar, and set to “CEILING” when suspending the projector from the ceiling using the ceiling bracket which is sold separately.

FAN CONTROL

FAN CONTROL STANDARD

[

HIGH

Set FAN CONTROL to “HIGH”, when using this projector at high elevations (above 1400 m) only.

LAMP POWER

LAMP POWER	HIGH
	[
	LOW

This setting changes the lamp brightness. When set to “LOW”, the

Adjustments and settings

42-ENGLISH ENGLISH-43