|
|
| PICTURE menu |
|
|
|
|
|
| STILL MODE |
|
| DETAILED SETUP |
| |
| You can reduce the vertical flicker when projecting | ||
| You can perform more detailed image adjustment | a still image. |
|
| OFF: | Deactive | |
| manually. | ||
| ON: | Active | |
|
| ||
For S-VIDEO/VIDEO signals
TV-SYSTEM
When the video signal is changed, the setting switches automatically. You can switch the setting manually to match the video data. Press I H to cycle through the options.
AUTO
SECAM
NTSC
NTSC 4.43
PAL
NOTE:
•AUTO setting will select from NTSC/NTSC 4.43/PAL/
NOTE:
• Set to OFF when projecting a moving image.
NOISE REDUCTION
You can switch the automatic noise reduction system on/off. Press I H to select the required setting.
OFF: No noise reduction
ON: Automatic noise reduction
NOTE:
• Applying noise reduction may affect the image quality.
For RGB signals
You can adjust the white balance more properly in 3 colours temperature by pressing I H.
WHITE BALANCE RED
WHITE BALANCE GREEN
WHITE BALANCE BLUE