Panasonic PT-LB78E manual Switching the projector on/off, Mains lead, Connecting

Page 20

Switching the projector on/off

Mains lead

Connecting

Disconnecting

1.Make sure the shape of the mains plug and the AC IN terminal on the back of the projector match, then push the plug all the way in.

1.Unplug the mains lead from the mains socket.

2.Depress the latch and slide the cover off.

Basic Operation

2.Align the side of the power cord secure lock with the side guide rail of the AC IN terminal of the projector and slide it in.

Rail guide

3.Place the latch to the latch catcher and press until it clicks.

Latch

4.Connect the mains lead to a mains socket.

5.The POWER and POWER LOCK indicators light in red and the projector stays in standby mode.

Latch

3.Slide the power cord secure lock up along the side guide rail and remove.

Rail guide

4.Hold the plug and unplug the mains lead from the AC IN terminal on the back of the projector.

POWER indicator lights in orange if the internal cooling fan is still operating by internal power supply.

Direct power off function

You can switch off the electric power supply any time by unplugging the mains plug from the mains socket or by switching off the main power. The internal lamp cooling fan keeps operating by the internal power supply, and stops automatically when cooled enough.

Direct power on function

If the DIRECT POWER ON in OPTION menu is set to ON, connect the mains lead to a mains socket and the projection will start even when the control panel is disabled or the POWER button is locked. See “DIRECT POWER ON” on page 37.

If the DIRECT POWER ON is set to OFF, the projector will be at the same mode as last unplugged, standby mode or projection mode.

NOTE:

•Do not use other than a provided mains lead.

•Ensure all the input devices are connected and turned off before connecting the mains lead.

•Do not force the connector as this may damage the projector and/or the mains lead.

•Dirt or dust build-up around plugs may cause fire or electrical hazards.

•Switch off the power to the projector when not in use.

•If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take a while to start the projection.

•Do not put the projector into the carrying bag with the POWER indicator lit.

ENGLISH - 20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents PT-LB80E PT-LB78E PT-LB75NTE PT-LB75E To rain or moisture Important Safety NoticeThis Apparatus Must be Earthed Important Safety Notice For business users in the European UnionImportant Safety Information Declaration of ConformityImportant Infomation Contents Settings MaintenanceContents AppendixPrecautions with regard to safety Precautions with regard to safety Do not set up the projector outdoorsDo not look into the lens while the projector is being used Always disconnect all cables before moving the projectorRemove the used batteries from the remote control promptly Do not put your weight on this projectorUse only the specified batteries Do not mix old and new batteriesSecurity Order to get the best picture qualityOptical components Liquid crystal panelK1HA15DA0002 AccessoriesM 5’10 Minimum required setting screen Read this firstAbout Your Projector Projector bodyTop and front view Control panelBack and bottom view Remote control Battery compartment Top viewAbout Your Projector Attaching a hand strapSetting up Calculation methods for screen dimensionsScreen size and throw distance PT-LB80NTE /LB80E PT-LB78E /LB75NTE / LB75EFront leg adjusters and throwing angle Setting upProjection method Mounting in the ceiling and projecting from frontConnecting example AV equipment Connecting example ComputersConnecting with Video IN/S-VIDEO ConnectionsSwitching the projector on/off ConnectingDirect power off function Direct power on functionSwitching on the projector Switching the projector on/offBy control panel operation By remote control operation By direct power on functionSwitching off the projector By remote control operationBy direct power off function By control panel operationPower and Power Lock indicators Power Lock indicator statusPower indicator status IndicatorPositioning the image Selecting the input signalProjecting an image Remote control operation Setting up the image position automaticallyOperating range Facing to the projectorSwitching the input signal Resetting to the factory default settingsRemote control operation Capturing an imageControlling the volume of the speaker Projecting an image in INDEX-WINDOW modeUsing an assigned function Enlarging the centred area Enlarging the imageShifting the centre point Press any side of the Digital Zoom +/- button onceMenu Navigation Navigating through the MenuStill Mode Main menu and Sub-menuMenu Navigation TV-SYSTEMSxga Mode OSD DesignBlackboard Back ColorPicture menu For RGB signals Detailed SetupFor S-VIDEO/VIDEO signals Position menu Frame Lock Position menu169 S43Option menu Lamp Power Power OFF TimerDirect Power on Auto SetupFunction Button Test PatternTYPE1 TYPE2Password Change Input PasswordSecurity menu Text DisplayWireless menu, the following items are available Wireless menuItems in Wireless menu Lamp and Temp Indicators Managing the indicated problemsLamp indicator Temp indicatorCare and Replacement Cleaning the projectorCare and Replacement When to replace the Lamp unitReplacing the Lamp unit Before replacing the lamp unitRemoving and replacing the lamp unit Care and Replacement Replacement procedureResetting the Lamp Runtime Troubleshooting List of compatible signals Technical InformationQuality*2 Dots*1 KHz MHzSerial terminal Technical Information Cable specifications Control commandsComputer connection guidance ProjectorPT-LB75NTE Screen size and throw distance for 169 aspect ratioPT-LB80NTE Specifications Video ComputerAudio Computer AudioUnit mm DimensionsTrademark acknowledgements Index Index Realtime Keystone ReleasePage TQBJ0245-3
Top Page Image Contents