Panasonic PT-LC50U manual Adjusting the White Balance, Press or to select

4 Press

Adjusting the White Balance

The picture may become over-saturated with red or blue color, and the white color may not be at the desired degree of whiteness. In such cases, adjust the white balance by the following procedure.

The procedure and on-screen display as shown below are based on RGB as the input signal from a personal computer.

•Adjustment procedure

(for white balance adjustment of the red component)

1 Press MENU to display the menu.

2 Press or to

select “White Balance”, and then ENTER to display the screen.

Picture

White Balance

Synchronization

Function

Language

Information

3 Press or to select

“R Level”.

or to

adjust the R Level setting.

•The current setting will be displayed on the screen by numerals and a bar.

White Balance

R Level	0
G Level	0
B Level	0

Standard (Push ENTER)

Continued on the next page... 48