Panasonic PT-LC50U manual VIDEO/VIDEO Signal Format Selection

Page 71

S-VIDEO/VIDEO Signal Format Selection

If the correct signal format is not selected and the picture does not appear normal when VIDEO or S-VIDEO signal is being input, select the format by the following procedure. This function is set to “AUTO” at the time of shipment from the factory, so that the projector can normally be used with this setting.

•Setting procedure

1 Press MENU to display the menu.

2 Press or to

select “Video System”, and then ENTER to display the screen.

Picture White Balance

Video System

Function

Language

Information

3 Press or to switch the setting to “AUTO”, “NTSC”, “NTSC4.43”, “PAL”, “PAL-M”,“PAL-N” or “SECAM” until a normal picture is obtained.

Video System

AUTO

NTSC

NTSC4.43

PAL

PAL-M

PAL-N

SECAM

Note

If using a signal source with poor picture quality, such as a dubbed tape, it may not be possible to get the picture to display properly.

71

Image 71

Contents Operating Instructions Things You Should Know Dear Panasonic CustomerDeclaration of Conformity Important Safeguards Important Safeguards Important Safeguards Important Safeguards Important Safeguards Built-in Simple Stand LCD Projector FeaturesCompact & Lightweight One-touch Auto SetupCD-ROM Manual Digital Zoom and Freeze FeatureAutomatic Universal Power Supply Equipped with a variety of convenient functions Image Quality Select Feature, R/G/B Level Adjust FeatureFrontal Air Vent Design Contents of LCD Projector Box LCD Projector Product InformationLCD Projector Control panel RGB/YPBPR Audio Video LCD Projector Connector panelVolume Remote Control unitReplacing the battery Before using the Remote Control UnitOperating range Attaching and Removing the Swivel Stand Example of connection to audio-visual equipment System Configuration ExampleExample of connection to a Personal Computer BNC-RCA Adaptor Connecting D-sub15-BNC5 female Adaptor CableSystem Configuration Example Setting-up Positions Rear projection Front projectionScreen size and required distance LCD Projector /Screen Relative Position Chart Turning the power on and off Wait for the cooling fan to stop Turning on the powerTurning off the power Adjusting the Lens Press the or Menu operationsPress the Menu Button Returning to the previous screen Press Menu to display the menu Changing the Projection ModeThen Enter to Setting the Screen TypePress Menu to display the menu Press or to Changing to 169 wide screen format Explanation of Screen Type Changing the input signal Changing the input signal Using the swivel stand Adjusting the LCD Projector projection angleFreezing the picture Adjusting the VolumeBasic LCD Projector Operation Black screen Press the Auto Setup button on the remote control unit Using the Auto Setup FeatureAdjusting the Image Position, Dot Clock and Phase Dot Clock Button Adjustment Details RemarksPhase PositionPress or to select Image Quality Or to Selecting the Image QualityPress or to select Color Press or to adjust the color Adjusting the Picture to the Desired SettingBrightness Adjustment Button Adjustment Details RemarksColor TintPress or to select Adjusting the White BalanceLevel Adjustment Button Adjustment DetailsPress or to change the input signal Setting of the RGB/YPBPR Input Signal SelectionTurning off the input signal display Auto Lamp Off Press or to select Expansion Canceling enlarging scanning line conversion functionPress the Keystone button Keystone correction functionScreen Projected pictures Press or to select language Selecting the Language for On-Screen DisplaysPress Enter to display the screen Information FunctionsDisplay Item Description Remarks No. of Dots Digital Zoom Functions Position cannot be moved with arrow Buttons on the unit Status Code Display Indications Symptom Problem Possible Solution Remove the Air Filter unit Cleaning the Air FilterSet the Power Button to OFF and unplug the power cord Air FilterClean the Filter Lamp replacement period Lamp ReplacementCase lamp time reaches 2 000 hours RGB Signals that can be Input Signals that can be Input Horizontal Vertical Dot clock Signals Component Signals Ypbpr that can be InputVIDEO/VIDEO Signal that can be Input VIDEO/VIDEO Signal Format Selection Blue Black Screen with No Input Signal Optional Accessories