Setting of the RGB/YPBPR Input Signal Selection
DTV Format Signal, such as DVD or digital broadcast, etc. can be input and projected with this Projector. When using this function, please refer to correctly connect to the output device of the DTV Format Signal and perform the following settings correctly.
This LCD Projector allows input of RGB or YPBPR signals (Component input signal) to the RGB/YPBPR input terminal, but you will need to change the setting of the input signal selection manually when changing the signal to be input. If the input signal selection is not set correctly, a normal image will not be projected.
The RGB input signal is set at the factory. Please follow the instructions below to change the input signal.
•Setting procedure
1 Press MENU to display the menu.
2 Press 
or 
to select “Function”, and then ENTER to display the screen.
Picture
White Balance
Synchronization
Function
Language
Information
3 Press 
or 
to select “RGB/YPBPR”.
4 Press 
or 
to change the input signal.
Function
RGB/YPBPR | •RGB •YPBPR | |
Projection Mode | •Front •Rear | |
Expansion | •ON | •OFF |
On Screen Display | •ON | •OFF |
Auto Lamp Off | •YES | •NO |
Standard (Push ENTER)
50