Panasonic PT-LB60NTU, PT-LB60U manual Daylight View, Detailed Setup

Page 42

NOTE:

BsRGB is only enabled when RGB signals are being input (when “LAMP POWER” is set to “STANDARD”, “AI” is set to “OFF”, and “DAYLIGHT VIEW” is set to “OFF”).

DAYLIGHT VIEW

This adjusts the vividness of the projected images when the projector is used under bright lighting.

AUTO

The vividness of the projected images will be adjusted according to the lighting condition of the room.

OFF

“DAYLIGHT VIEW” is disabled.

NOTE:

B“AUTO” may not function correctly if any objects are placed on the projector.

B“AUTO” will be disabled when “INSTALLATION” in the “OPTION” menu is set to “REAR/DESK” or “REAR/CEILING”.

AI

ON

The lamp is controlled according to the input signals to project images with the best quality.

OFF

“AI” is disabled.

NOTE:

B“AI” is disabled when “LAMP POWER” is set to “ECO- MODE”. (Refer to page 50.)

DETAILED SETUP

You can adjust the picture quality of the projected images in detail. Press the ENTER button to display the “DETAILED SETUP” menu.

WHITE BALANCE

RED/GREEN/BLUE

(RGB only)

This is used to adjust the white areas of the picture if they appear colorised.

To make the selected color lighter:

Ibutton

To make the selected color stronger:

Hbutton

42-ENGLISH

Page 41 Page 43
Image 42
Page 41 Page 43
Contents LCD Projector Commercial Use Model No. PT-LB60NTUDear Panasonic Customer Model number PT-LB60NTU / PT-LB60UFCC RF Exposure Warning if provided with wireless device PreparationDeclaration of Conformity Contents Precautions with regard to safety Do not overload the wall outletDo not remove the cover or modify it in any way Do not place the projector into water or let it become wet Do not handle the power cord plug with wet handsInsert the power cord plug securely into the wall outlet Do not place liquid containers on top of the projectorDo not look into the lens while the projector is being used Do not cover the air inlet port or the air outlet portDo not place any heavy objects on top of the projector Do not put your weight on this projectorAlways disconnect all cables before moving the projector Use only the specified batteriesAccessories Before use Be sure to attach the lens cover before moving the projectorScreen Order to get the best picture qualityDo not touch the surfaces of the lens with your bare hands LampLeg adjuster buttons L/R Lens cover Projection lens Remote control signal receptorLocation and function of each part # Connector panel $ Air outlet port $ %# PC Input indicator Projector control panelAuto Setup button pages 27 $ Lamp indicatorTemp indicator Illumination sensor$ PC 1 in connector pages 21 Default buttonVolume +/- buttons Direct Input Select buttons pages 27Variable Audio OUT connector pages 21, 22, PC 2 IN/PC 1 OUT connector pages 21, 22Video in connector pages 23 + PC 1/2 Audio in connectors pages 21Setting-up Projection methodsProjector position Projection distances Connecting to computer ConnectionsConnecting to video equipment Audio system Video deck Preparation for the remote control unit ENGLISH-25 Turn on the power of all connected devices Turning on the power$Press the Power button Before turning on the powerAdjusting the focus Adjusting the angleAdjusting the size Direct power on functionTurning off the power #Press the Power button$Pressagain. the Power button Direct power off function Power button on the projectorProjector status Selecting the input signal Press the Input Select buttonPress the Direct Input Select buttons Correcting the image position automatically Auto Setup Turning off the picture and sound momentarily Shutter Adjusting the volume VolumePress the Volume +/- button Press the Shutter buttonButton functions when using Digital Zoom Enlarging the picture Digital ZoomPress the Digital Zoom +/- button Displaying two screens Index Window Press the Index Window buttonDisplaying the pointer Pointer Press the Pointer buttonMoving the pointer Menu Screen On-screen menusMenu screens Picture menu Position menuENGLISH-37 Menu operation guide # Press the Menu buttonPress the Enter button Returning a setting to the factory default When a menu screen is being displayedWhen an individual adjustment screen is being displayed Adjusting the picture Picture ModeBrightness Color TemperatureContrast ColorDetailed Setup Daylight ViewTV-SYSTEM Adjusting the position Realtime KeystoneKeystone Position Clock PhaseAdjustments DOT ClockAuto S-VIDEO only S1 video signalsAspect 169Resizing Frame LockChanging the display language Option settings Input GuideStartup Logo PC2 Select Lamp PowerPointer Select Lamp RuntimeAuto Setup Power OFF TimerDirect Power on Signal SearchHighland InstallationVolume RGB/YPBPRIndex Window TYPE1 Transparent blackSetting up the security function Input PasswordPassword Change Settings Text DisplayText Change WEB Control NetworkName Change StatusLamp indicator Temp indicator RemedyLamp indicator Replacement procedure Cleaning and replacing the air filterCleaning Air filter should be cleaned every 100 hours of useLamp unit replacement period Replacing the lamp unitLamp unit replacement procedure HandlesEnglish Before calling for service Cleaning and maintenance Specifications PC IN/OUTRemote control unit OptionsProjection dimensions calculation methods AppendixDisplay Scanning List of compatible signalsMode Resolution FrequencyManufacturer Keyboard Command Guide screen for computer connectionCommunications settings Using the Serial connectorPin assignments and signal names ConnectionControl commands Cable specificationsCommand Control Contents Remarks Dimensions Trademark acknowledgementsPréparatifs Ne pas surcharger la prise de courant Précautions de sécuritéAvertissement Ne pas retirer le capot ou le modifierNe pas placer le projecteur sur des surfaces instables Ne pas placer des récipients de liquide sur le projecteurNe pas mettre d’objets étrangers dans le projecteur Garder les piles hors de portée des enfants Pendant un orage, ne pas toucher le projecteur ou le câbleNe pas obstruer les orifices d’entrée et de sortie d’air Ne pas mélanger des piles usées et des piles neuves Ne pas placer d’objets lourds sur le projecteurUtiliser uniquement les piles spécifiées Ne pas peser de tout son poids sur ce projecteurPrécaution à prendre lors du déplacement du projecteur Avertissements concernant l’installationAvant l’utilisation Lampe Afin d’obtenir la meilleure qualité d’imageÉcran Affichage à cristaux liquidesRemplacement du bloc de lampe Période de remplacement du bloc de lampePréparatifs Méthode de remplacement du bloc de lampe Poignées Vis de fixation du bloc de lampeDurée DE LA Lampe
Related manuals
Manual 82 pages 61.43 Kb Manual 4 pages 33.41 Kb

PT-LB60U, PT-LB60NTU specifications

The Panasonic XGA3200, also known as the PT-LB60NTU, is an advanced portable projector designed to meet the needs of educational institutions, business meetings, and large venue presentations. This versatile projector offers stunning visual performance, engaging features, and unique technologies that cater to various projection requirements.

One of the standout features of the PT-LB60NTU is its impressive XGA resolution (1024 x 768 pixels), which delivers clear and detailed images, making it ideal for displaying presentations, videos, and complex graphics. With a brightness of 3,200 lumens, the projector ensures vivid colors and sharp contrasts, even in well-lit environments. This makes it a reliable choice for classrooms and conference rooms where ambient light can interfere with visibility.

Another significant characteristic of the PT-LB60NTU is its lightweight and compact design. Weighing just 2.6 kilograms, it is highly portable, allowing users to easily transport it from one location to another. This is especially beneficial for traveling professionals and educators who need a projector that can adapt to different settings without compromising performance.

The projector is equipped with a lamp life of up to 5,000 hours in Eco Mode, reducing the frequency of lamp replacements and minimizing maintenance costs. Additionally, the Eco Management feature optimizes power consumption, allowing users to save on energy costs while being environmentally conscious.

The PT-LB60NTU supports a range of connectivity options, including HDMI, VGA, and USB interfaces, providing flexibility when connecting to various devices such as laptops, tablets, and multimedia players. The USB Display function allows users to project images and audio directly from their computers without the need for additional software.

Panasonic's Daylight View technology enhances image quality by automatically adjusting brightness and contrast to suit ambient lighting conditions, ensuring optimal viewing experiences. The projector also features a built-in speaker system, negating the need for external audio devices in smaller settings.

In conclusion, the Panasonic XGA3200 PT-LB60NTU projector excels in delivering high-quality visuals while offering portability and versatile connectivity options. Its durable design, extended lamp life, and advanced technologies make it a top choice for professional presentations, educational settings, and any environment that demands reliable and impactful projection capabilities.
Top Page Image Contents