Panasonic PT-LB60NTU, PT-LB60U manual English

Page 62

'Install the lamp unit cover, and then use a Phillips screwdriver to securely tighten the lamp unit cover fixing screws.

NOTE:

BBe sure to install the lamp unit and the lamp unit cover securely. If they are not securely installed, it may cause the protection circuit to operate so that the power cannot be turned on.

(Connect the power cord.

)Press the POWER button so that a picture is projected onto the screen.

NOTE:

BIf “DIRECT POWER ON” in the “OPTION” menu has been set to “ON”, projection will start after the power cord is connected. Refer to page 51 for details.

*Press the MENU button to display the menu screen, and then press the F or G button to select the “OPTION” menu.

+Press the ENTER button, and then press the F or G button to select “LAMP RUNTIME”.

,Press and hold the ENTER button for approximately 3 seconds.

The “LAMP RUNTIME” screen will be displayed.

NOTE:

BPress any button other than the POWER button to cancel the “LAMP RUNTIME” screen.

-Press the POWER button to turn off the power.

.Disconnect the power cord after the POWER button on the projector illuminates red.

This will reset the cumulative usage time for the lamp unit to “0”.

62-ENGLISH

Page 61 Page 63
Image 62
Page 61 Page 63
Contents LCD Projector Commercial Use Model No. PT-LB60NTUDear Panasonic Customer Model number PT-LB60NTU / PT-LB60UDeclaration of Conformity FCC RF Exposure Warning if provided with wireless devicePreparation Contents Do not remove the cover or modify it in any way Precautions with regard to safetyDo not overload the wall outlet Do not place the projector into water or let it become wet Do not handle the power cord plug with wet handsInsert the power cord plug securely into the wall outlet Do not place liquid containers on top of the projectorDo not look into the lens while the projector is being used Do not cover the air inlet port or the air outlet portDo not place any heavy objects on top of the projector Do not put your weight on this projectorAlways disconnect all cables before moving the projector Use only the specified batteriesAccessories Before use Be sure to attach the lens cover before moving the projectorScreen Order to get the best picture qualityDo not touch the surfaces of the lens with your bare hands LampLocation and function of each part Leg adjuster buttons L/RLens cover Projection lens Remote control signal receptor # Connector panel $ Air outlet port $ %# PC Input indicator Projector control panelAuto Setup button pages 27 $ Lamp indicatorTemp indicator Illumination sensor$ PC 1 in connector pages 21 Default buttonVolume +/- buttons Direct Input Select buttons pages 27Variable Audio OUT connector pages 21, 22, PC 2 IN/PC 1 OUT connector pages 21, 22Video in connector pages 23 + PC 1/2 Audio in connectors pages 21Setting-up Projection methodsProjector position Projection distances Connecting to computer ConnectionsConnecting to video equipment Audio system Video deck Preparation for the remote control unit ENGLISH-25 Turn on the power of all connected devices Turning on the power$Press the Power button Before turning on the powerAdjusting the focus Adjusting the angleAdjusting the size Direct power on function$Pressagain. the Power button Turning off the power#Press the Power button Projector status Direct power off functionPower button on the projector Press the Direct Input Select buttons Selecting the input signalPress the Input Select button Correcting the image position automatically Auto Setup Turning off the picture and sound momentarily Shutter Adjusting the volume VolumePress the Volume +/- button Press the Shutter buttonPress the Digital Zoom +/- button Button functions when using Digital ZoomEnlarging the picture Digital Zoom Displaying two screens Index Window Press the Index Window buttonMoving the pointer Displaying the pointer PointerPress the Pointer button Menu Screen On-screen menusMenu screens Picture menu Position menuENGLISH-37 Press the Enter button Menu operation guide# Press the Menu button When an individual adjustment screen is being displayed Returning a setting to the factory defaultWhen a menu screen is being displayed Adjusting the picture Picture ModeBrightness Color TemperatureContrast ColorDetailed Setup Daylight ViewTV-SYSTEM Keystone Adjusting the positionRealtime Keystone Position Clock PhaseAdjustments DOT ClockAuto S-VIDEO only S1 video signalsAspect 169Resizing Frame LockChanging the display language Startup Logo Option settingsInput Guide PC2 Select Lamp PowerPointer Select Lamp RuntimeAuto Setup Power OFF TimerDirect Power on Signal SearchHighland InstallationVolume RGB/YPBPRIndex Window TYPE1 Transparent blackPassword Change Setting up the security functionInput Password Text Change SettingsText Display WEB Control NetworkName Change StatusLamp indicator Temp indicator RemedyLamp indicator Replacement procedure Cleaning and replacing the air filterCleaning Air filter should be cleaned every 100 hours of useLamp unit replacement period Replacing the lamp unitLamp unit replacement procedure HandlesEnglish Before calling for service Cleaning and maintenance Specifications PC IN/OUTRemote control unit OptionsProjection dimensions calculation methods AppendixDisplay Scanning List of compatible signalsMode Resolution FrequencyManufacturer Keyboard Command Guide screen for computer connectionCommunications settings Using the Serial connectorPin assignments and signal names ConnectionCommand Control Contents Remarks Control commandsCable specifications Dimensions Trademark acknowledgementsPréparatifs Ne pas surcharger la prise de courant Précautions de sécuritéAvertissement Ne pas retirer le capot ou le modifierNe pas mettre d’objets étrangers dans le projecteur Ne pas placer le projecteur sur des surfaces instablesNe pas placer des récipients de liquide sur le projecteur Ne pas obstruer les orifices d’entrée et de sortie d’air Garder les piles hors de portée des enfantsPendant un orage, ne pas toucher le projecteur ou le câble Ne pas mélanger des piles usées et des piles neuves Ne pas placer d’objets lourds sur le projecteurUtiliser uniquement les piles spécifiées Ne pas peser de tout son poids sur ce projecteurAvant l’utilisation Précaution à prendre lors du déplacement du projecteurAvertissements concernant l’installation Lampe Afin d’obtenir la meilleure qualité d’imageÉcran Affichage à cristaux liquidesRemplacement du bloc de lampe Période de remplacement du bloc de lampePréparatifs Méthode de remplacement du bloc de lampe Poignées Vis de fixation du bloc de lampeDurée DE LA Lampe
Related manuals
Manual 82 pages 61.43 Kb Manual 4 pages 33.41 Kb

PT-LB60U, PT-LB60NTU specifications

The Panasonic XGA3200, also known as the PT-LB60NTU, is an advanced portable projector designed to meet the needs of educational institutions, business meetings, and large venue presentations. This versatile projector offers stunning visual performance, engaging features, and unique technologies that cater to various projection requirements.

One of the standout features of the PT-LB60NTU is its impressive XGA resolution (1024 x 768 pixels), which delivers clear and detailed images, making it ideal for displaying presentations, videos, and complex graphics. With a brightness of 3,200 lumens, the projector ensures vivid colors and sharp contrasts, even in well-lit environments. This makes it a reliable choice for classrooms and conference rooms where ambient light can interfere with visibility.

Another significant characteristic of the PT-LB60NTU is its lightweight and compact design. Weighing just 2.6 kilograms, it is highly portable, allowing users to easily transport it from one location to another. This is especially beneficial for traveling professionals and educators who need a projector that can adapt to different settings without compromising performance.

The projector is equipped with a lamp life of up to 5,000 hours in Eco Mode, reducing the frequency of lamp replacements and minimizing maintenance costs. Additionally, the Eco Management feature optimizes power consumption, allowing users to save on energy costs while being environmentally conscious.

The PT-LB60NTU supports a range of connectivity options, including HDMI, VGA, and USB interfaces, providing flexibility when connecting to various devices such as laptops, tablets, and multimedia players. The USB Display function allows users to project images and audio directly from their computers without the need for additional software.

Panasonic's Daylight View technology enhances image quality by automatically adjusting brightness and contrast to suit ambient lighting conditions, ensuring optimal viewing experiences. The projector also features a built-in speaker system, negating the need for external audio devices in smaller settings.

In conclusion, the Panasonic XGA3200 PT-LB60NTU projector excels in delivering high-quality visuals while offering portability and versatile connectivity options. Its durable design, extended lamp life, and advanced technologies make it a top choice for professional presentations, educational settings, and any environment that demands reliable and impactful projection capabilities.
Top Page Image Contents