Setting up the security function
This projector is equipped with a security function. A password input screen can be displayed, or a company URL can be set up and displayed at the bottom of the projected image.
#Press the MENU button to display the menu screen.
$Select the “SECURITY” menu from the main menu, and then press the ENTER button.
(When you use the “SECURITY” function for the first time)
Press the F, H, G, I, F, H, G and I buttons in order, then press the ENTER button.
(When a password change has been made before)
Type in the changed password, then press the ENTER button.
%Press the F or G button to
select an item.
&Press the I or H button to
change the setting.
For “PASSWORD CHANGE” and “TEXT CHANGE”, press the ENTER button to display the next screen.
INPUT PASSWORD
The password input screen can be displayed when the power is turned on. All of the controls other than the POWER button are disabled unless the password is entered correctly.
OFF
“INPUT PASSWORD” is disabled.
ON
“INPUT PASSWORD” is enabled.
PASSWORD CHANGE
Passwords can be changed. Press the ENTER button to display the “PASSWORD CHANGE” screen.
#Set a password by pressing the F,G,I, and H buttons.
(A maximum of 8 buttons can be set.)
$Press the ENTER button.
%Enter the password again for confirmation.
&Press the ENTER button.