Panasonic PT-LB30E Illumination sensor, Input buttons, Auto Setup button pages 25, Enter button

Page 17

the projector or around it. If the temperature rises above a certain level, the power supply will be turned off automatically and the indicator will flash.

&Illumination sensor (page 39)

This sensor detects the luminance when the “DAYLIGHTVIEW” function is operating. Do not cover the projector and do not place any object on the projector when using it.

'POWER button (pages 24, 26 and 27)

This button is used to turn the power on and off. This button on the projector illuminates red when the projector is in standby mode, and it illuminates green when a picture starts to be projected.

(INPUT buttons (page 25)

These buttons are used to switch the input signals from the connected equipment.

)AUTO SETUP button (pages 25 and 28)

If this button is pressed while a picture is being projected, the projection settings will be adjusted automatically in accordance with the signal being input. In addition, the angle of tilt of the projector will be automatically detected and adjusted in order to correct any keystone distortion.

*MENU button (pages 32 and 34)

This button is used to display the “MAIN MENU”. When a menu screen is being displayed, this button can be used to return to a previous screen or to clear the screen.

+Arrow (FGI and H) buttons (page 34)

These buttons are used to select and adjust items in the on-screen menus.

,ENTER button (page 34)

This button is used to accept and to activate items selected in the on-screen menus.

-FREEZE button (page 29)

This button is used to momentarily freeze projection so that a still picture is displayed.

.SHUTTER button (page 29)

This button is used to momentarily turn off the picture and sound.

/VOLUME +/- buttons (page 30)

These buttons are used to adjust the volume of the sound that is output from the projector’s built-in speakers and AUDIO OUT connector. Refer to page 33 for details on how to adjust the volume without using the remote control unit.

0STD (standard) button (page 35)

This button is used to reset the projector adjustment values to the factory default settings.

1INDEX WINDOW button (page 31)

This button can be used to split the image projection area into a still picture and a moving picture. When NETWORK is selected, the screen display will be switched between four window style, index style, and 16 Index style.

(PT-LB30NTE only. Refer to the accessory CD-ROM for details.)

2D.ZOOM +/- buttons (page 30)

These buttons are used to enlarge the projected image.

Preparation

ENGLISH-17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Model No. PT-LB30NTE LCD Projector Commercial UseModel number PT-LB30NTE / PT-LB30E Dear Panasonic CustomerPreparation Contents Do not remove the cover or modify it in any way Precautions with regard to safetyDo not overload the mains socket Insert the mains plug securely into the mains socket Do not handle the mains plug with wet handsDo not place the projector into water or let it become wet Do not place liquid containers on top of the projectorDo not cover the air inlet port or the air outlet port Do not use the projector in a bath or showerDo not look into the lens while the projector is being used Do not put your weight on this projector Insulate the battery using tape or similar before disposalAlways disconnect all cables before moving the projector Do not place any heavy objects on top of the projectorAccessories Be sure to attach the lens cover before moving the projector Before useDo not touch the surfaces of the lens with your bare hands Order to get the best picture qualityScreen LampLocation and function of each part Leg adjuster buttons L/RLens cover Projection lens Remote control signal receptor $ % # Connector panel $ Air outlet portRGB2 IN/1 OUT connector pages 20, 21 $ RGB1 in connector pages 20Video in connector pages 22 Audio in L-R connectors for S-VIDEO/VIDEOPower input socket AC + RGB Audio 1IN/2IN connectors pages 20$ Lamp indicator # RGB Input indicatorTemp indicator MenuVolume +/- buttons Auto Setup button pages 25Illumination sensor Input buttonsProjection methods Setting-upProjection distances Projector positionConnections Connecting to computerConnecting to video equipment Connecting to video equipment Insert the battery holder Preparation for the remote control unit$Press the Power button Turning on the powerTurn on the power of all connected devices Before turning on the powerAdjusting the angle Press the input select button to select the input signalAdjusting the size Adjusting the focusPress the Power button Turning off the powerProjector status Direct power off functionPower button on the projector Press the Auto Setup button Press the Freeze button Pausing a picture FreezeTurning off the picture and sound momentarily Shutter Remote control unit functions during D.ZOOM digital zoom Adjusting the volume VolumePress the Volume +/- button Enlarging the picture D.ZOOMPress the Index Window button Displaying two screens Index WindowMenu screens On-screen menusKeystone Keystone correctionAdjustments and settings Index Window function Shutter function Volume adjustmentPosition menu Language menuMenu operation guide STD Returning a setting to the factory defaultContrast Bright Color Tint Sharpness Color Temp Select Enter RetrnVertical keystone distortion correction only Correcting keystone distortionVertical OperationPicture Mode Adjusting the pictureBright ContrastColor TintDaylightview Mode Auto OFFDaylightview Signal Mode Still ModeTV-SYSTEM TV-SYSTEM Auto NtscClock Phase Adjusting the positionPosition DOT ClockAspect Auto AspectFrame Lock ResizingChanging the display language Auto Signal Option settingsOSD Auto SearchRGB2 Select Sxga ModeRGB/YPBPR BlackboardDESK/CEILING Lamp PowerFAN Control Lamp RuntimeAuto POW.OFF Power MemoryControl KEY Amend Passwd Setting up the security functionInput Passwd Text Change Text DisplayNetwork DefaultName Change WEB ControlRemedy Lamp indicator Temp indicatorLamp Power Lamp indicatorCleaning Cleaning and replacing the air filterReplacement procedure Air filter should be cleaned every 100 hours of useReplacing the lamp unit Lamp unit replacement periodLamp unit replacement procedure Control KEY Auto POW.OFF Disable Lamp PowerOption Back Color FRONT/REAR Front DESK/CEILINGBefore calling for service Cleaning and maintenance PAL60/SECAM SpecificationsOptions Remote control unitAppendix List of compatible signalsProjection dimensions calculation methods Pin assignments and signal names Using the Serial connectorCommunications settings ConnectionCommand Control Remarks Contents Control commandsCable specifications Trademark acknowledgements Dimensions
Top Page Image Contents