Setting up the security function
This projector is equipped with a security function. A password input screen can be displayed, or a company URL can be set up and displayed at the bottom of the projected image.
Press the F or G button on the projector or remote control unit to select “SECURITY”, then press the ENTER button.
MENU
KEYSTONE
PICTURE
POSITION
INDEX WINDOW
SHUTTER
VOLUME
LANGUAGE
OPTION
SECURITY
NETWORK
SELECT
ENTER
EXIT
PASSWORD 
OK 
RETURN
(When you use the “SECURITY” function for the first time)
Press the F, H, G, I, F, H, G and I buttons in order, then press the ENTER button.
(When a password change has been made before)
Type in the changed password, then press the ENTER button.
| SECURITY |
|
INPUT | PASSWD | OFF |
AMEND | PASSWD |
|
TEXT | DISPLAY | OFF |
TEXT | CHANGE |
|
SELECT ADJ | RETRN | |
INPUT PASSWD
The password input screen can be displayed when the power is turned on. All of the controls other than the POWER button are disabled unless the password is entered correctly.
ON
“INPUT PASSWD” is enabled.
OFF
“INPUT PASSWD” is disabled. The password input screen will not be displayed when the power is turned on.
AMEND PASSWD
Passwords can be changed. Press the ENTER button to display the “AMEND PASSWD” screen.
AMEND PASSWD
NEW
CONFIRM
OK 
RETURN
#Set a password by pressing the F,G,I, and H buttons.
(A maximum of 8 buttons can be set.)
$Press the ENTER button.
%Enter the password again for confirmation.
&Press the ENTER button. Password change will be completed.