Panasonic PT-F100U Ceiling mount bracket safeguards, Care and Replacement Replacement procedure

Page 44

Care and Replacement

Replacement procedure

Removing and replacing the lamp unit

1. Use a Phillips-head screwdriver to loosen the 3	5. Replace the new Lamp unit in correct direction.
Lamp unit cover fixing screws on the back of the
projector until the screws turn freely, and remove
the Lamp unit cover.
Lamp unit cover

Lamp unit cover fixing screws

2.Use a Phillips-head screwdriver to loosen the 2 Lamp unit fixing screws.

3.Hold the handles of the Lamp unit and release the lamp unit lock.

4.Pull the used Lamp unit gently from the projector.

Lamp unit

fixing screws

Handles

6.Press in the Lamp unit until it clicks and make sure the unit is installed securely.

7.Tighten the 2 Lamp unit fixing screws securely with a Phillips-head screwdriver.

Lamp unit	Press here
Lamp unit
fixing screws

8.Attach the Lamp unit cover and tighten the 3 Lamp unit cover fixing screws securely with a Phillips-head screwdriver.

Maintenance

Ceiling mount bracket safeguards

The projector and the ceiling mount bracket are designed sufficiently safety though, make sure the safety cable provided with the projector is installed and attached to the bottom of the projector when mounting in the ceiling for safety and security.

NOTE:

•Even if it is guarantee period, the manufacturer is not responsible for any hazard or damage caused by using a ceiling mount bracket which is not purchased from an authorized distributors, or environmental conditions.

•Make sure to use a torque driver and do not use an electrical screwdriver or an impact screwdriver.

•Installation work of the ceiling mount bracket should only be carried by a qualified technician.

•Remove an unused ceiling mount bracket promptly.

Installing the safety cable

1.Install the ceiling mount bracket according to the installation instructions.

2.Loop the security cable around the ceiling mount bracket with less slack.

Lace the cable of the end with a latch through the loop on the other end of the cable.

3.Attach the latch on to the bottom of the projector with a provided screw. Torque: 125±20 CN·m

ENGLISH - 44

Image 44

Contents PT-F100U Important Safety Notice Model number PT-F100NTU / PT-F100UImportant Safety Notice Declaration of ConformityModel Number PT-F100NTU / PT-F100U Trade Name PanasonicDeclaration of Conformity Declaration of Conformity DoCImportant Infomation Contents Appendix SettingsMaintenance Precautions with regard to safety Precautions with regard to safety Do not look into the lens while the projector is being usedLamp cover gets very hot, and touching it can cause burns Use only the specified batteriesRemove the used batteries from the remote control promptly Do not put your weight on this projectorDo not mix old and new batteries Electric shocks can result if this is not doneAccessories Minimum required setting screen Read this firstRemote control About Your ProjectorProjector body About Your ProjectorTop and front view Control panelOutput by menu operation About Your Projector Back and bottom viewComputer. Selectable for input Setting up Calculation methods for screen dimensionsScreen size and throw distance Projected imageFront leg adjusters and throwing angle Setting upProjection method Mounting in the ceiling and projecting from frontAdjusting the Lens shift lever Lens shift and positioningHorizontal shift Vertical shiftWhen the projector position is fixed Setting up Projector location rangeWhen the screen position is fixed Connecting with computers LAN cable RGB signal cableConnections Before connection to the projectorConnecting with AV equipment Connecting with Video IN/S-VIDEOConnecting with Component ConnectionsPower indicator Switching the projector on/offPower cord Switching on the projector Switching off the projectorSwitching the projector on/off Switch the Main Power on Press the Power buttonSelecting the input signal Projecting an imagePositioning the image Focus lever Zoom leverRemote control operation Setting up the image position automaticallyOperating range Facing to the projectorSwitching the input signal Using the laser pointerResetting to the factory default settings Projecting an image in INDEX-WINDOW modeCapturing an image Stopping the projection temporaryControlling the volume of the speaker Enlarging the centered areaEnlarging the image Shifting the center pointAdjusting with the bar scale items Menu NavigationNavigating through the Menu Displaying the Main menuMain menu and Sub-menu Menu NavigationNetwork Standby WEB Control Live Mode CUT Status InitializeAudio Balance Picture menu For RGB signals Detailed SetupFor S-VIDEO/VIDEO signals Position menu When the Resizing is set to OFF ResizingFrame Lock Position menuOption menu Input GuideStartup Logo COMPUTER2 SelectPower OFF Timer Auto SetupDirect Power on Signal SearchHighland Closed CaptionTest Pattern CC2 TT1Input Password Password ChangeSecurity menu Text DisplayNetwork menu, the following items are available Network menuItems in Network menu TEMP, Lamp and ARF Indicators Managing the indicated problemsLamp indicator Temp indicatorReplacing the ARF Auto Rolling Filter Care and ReplacementCleaning the projector Care and Replacement When to replace the Lamp unitReplacing the Lamp unit Before replacing the Lamp unitCeiling mount bracket safeguards Care and Replacement Replacement procedureInstalling the safety cable Removing and replacing the lamp unitTroubleshooting List of compatible signals Technical InformationQuality*2 Dots*1 KHz MHzSerial terminal Technical Information Cable specifications Control commandsComputer connection guidance ProjectorLamp switching Switching input SignalsInput signal Remote terminalSpecifications OUT AudioComputer Audio Variable AudioScreen size and throw distance for 169 aspect ratio Projection size 16 Throw distance LScreen height SH Screen width SW Minimum distance SW = SD x SH = SD x Unit m LW = 0.0332 x SD LT = 0.066 x SDThese Operating Instructions are printed on recycled paper DimensionsTrademark acknowledgements Index ALS Ambient Luminance Sensor ARF Auto Rolling FilterCalculation methods LeverIndex Numéro de série Avis important concernant la sécuritéNuméro de modèle PT-F100NTU / PT-F100U Advertencia Avis important concernant la sécuritéAvertissement Déclaration de conformité Précautions de sécurité AvertissementMises EN Garde Précautions de sécuritéSinon cela peut causer des chocs électriques Utiliser uniquement les piles spécifiéesNe pas mélanger des piles usées et des piles neuves Précautions lors de lutilisation Précautions lors de linstallationPrécautions lors du transport Remplacement de lunité de la lampe Délai de remplacement de lUnité de la lampe«LAMPE DE REMPLACEMENT» est Avant de remplacer le lUnité de la lampeRetirer et remplacer la lampe De lUnité de La lampeProtections du support de montage au plafond Remplacement de lunité de la lampeInstallation du câble de sécurité Professional/Industrial Video Panasonic Projector Systems CompanyTechnical Support