Panasonic PT-LB10SE manual Temp indicator, Input buttons, Auto Setup button pages 25, Enter button

Page 17

%TEMP indicator (page 50)

This indicator illuminates if an abnormally high temperature is detected inside the projector or around it. If the temperature rises above a certain level, the power supply will be turned off automatically and the indicator will flash.

&Power indicator (pages 24, 26 and 27)

This indicator illuminates red when the projector is in standby mode, and it illuminates green when a picture starts to be projected.

'POWER button (pages 24 and 26)

(INPUT buttons (page 25)

These buttons are used to switch the input signals from the connected equipment.

)AUTO SETUP button (pages 25 and 28)

If this button is pressed while a picture is being projected, the projection settings will be adjusted automatically in accordance with the signal being input. In addition, the angle of tilt of the projector will be automatically detected and adjusted in order to correct any keystone distortion.

*MENU button (pages 32 and 34)

This button is used to display the “MAIN MENU”. When a menu screen is being displayed, this button can be used to return to a previous screen or to clear the screen.

+Arrow (FGI and H) buttons (page 34)

These buttons are used to select and adjust items in the on-screen menus.

,ENTER button (page 34)

This button is used to accept and to activate items selected in the on-screen menus.

-FREEZE button (page 29)

This button is used to momentarily freeze projection so that a still picture is displayed.

.SHUTTER button (page 29)

This button is used to momentarily turn off the picture and sound.

/VOLUME +/- buttons (page 30)

These buttons are used to adjust the volume of the sound output from the projector’s built-in speaker. Refer to page 33 for details on how to adjust the volume using the buttons on the projector control panel.

0STD (standard) button (page 35)

This button is used to reset the projector adjustment values to the factory default settings.

1INDEX WINDOW button (page 31)

This button can be used to split the image projection area into a still picture and a moving picture. When “NETWORK” is selected, screen display will be switched between four window style and index style. (PT-

LB10NTE only. Refer to the accessory CD-ROM for details.)

2D.ZOOM +/- buttons (page 30)

These buttons are used to enlarge the projected image.

Preparation

ENGLISH-17

Image 17
Contents Model No. PT-LB10NTE LCD Projector Commercial UseModel number PT-LB10NTE / PT-LB10E / PT-LB10VE / PT-LB10SE Dear Panasonic CustomerPreparation Fuse For Your SAFETY, Please Read the Following Text CarefullyImportant the Moulded Plug U.K. only Contents Do not remove the cover or modify it in any way Precautions with regard to safetyDo not overload the mains socket Insert the mains plug securely into the mains socket Do not handle the mains plug with wet handsDo not place the projector into water or let it become wet Do not place liquid containers on top of the projectorDo not look into the lens while the projector is being used Do not use the projector in a bath or showerDo not cover the air inlet port or the air outlet port Always disconnect all cables before moving the projectorUse only the specified batteries Insulate the battery using tape or similar before disposalDo not put your weight on this projector PT-LB10NTE only AccessoriesBe sure to attach the lens cover before moving the projector Before useWireless card slot PT-LB10NTE only Wireless card PT-LB10NTE onlyOrder to get the best picture quality Do not touch the surfaces of the lens with your bare handsLocation and function of each part Leg adjuster buttons L/RLens cover Projection lens Remote control signal receptor $%$ # Connector panel $ Air outlet portRGB in connector pages 21 # Power input socket ACRGB OUT connector Video in connector pages 22# RGB Input indicator Remote control unit$ Lamp indicator MenuAuto Setup button pages 25 Temp indicatorVolume +/- buttons Input buttonsPT-LB10NTE only Wireless card Inserting the wireless card PT-LB10NTE only# Connector $ Wireless card access indicatorProjection methods Setting-upProjection distances Projector positionConnections Connecting to computerET-ADSER Connecting to video equipmentInsert the battery holder Preparation for the remote control unitTurn on the power of all connected devices Turning on the power$Press the Power button Adjusting the angle Press the input select button to select the input signalAdjusting the size Adjusting the focus#Press the Power button Turning off the powerProjector status Direct power off functionPower indicator Press the Auto Setup button Press the Freeze button Pausing a picture FreezeTurning off the picture and sound momentarily Shutter Remote control unit functions during D.ZOOM digital zoom Adjusting the volume VolumePress the Volume +/- button Enlarging the picture D.ZOOMPress the Index Window button Displaying two screens Index WindowMenu screens On-screen menusKeystone KeystoneSxga Mode OFF Blackboard Auto Search Signal Keystn RGB/YP B P RPower High KEY Auto POW.OFF DisablePicture Menu operation guideSelect Select ADJPicture Mode Returning a setting to the factory defaultStandard PictureVertical keystone distortion correction only Correcting keystone distortionVertical OperationDynamic Adjusting the picturePicture Mode Bright ContrastColor TintSignal Mode Still ModeTV-SYSTEM TV-SYSTEM Auto NtscClock Phase Adjusting the positionPosition DOT ClockAspect Auto AspectFrame Lock ResizingOSD Option settingsChanging the display language Sxga Mode Auto SignalAuto Search Auto KeystnBlackboard Lamp PowerBack Color FRONT/REARLamp Runtime Power MemoryFunc Control KEYInput Passwd Setting up the security functionAmend Passwd SecurityText Change Text DisplayNetwork DefaultName Change WEB ControlRemedy Lamp indicator Temp indicatorLamp Power Lamp indicatorCleaning Cleaning and replacing the air filterReplacement procedure Air filter should be cleaned every 100 hours of useReplacing the lamp unit Lamp unit replacement periodLamp unit replacement procedure Lamp Power Time ResetOPTION2 RuntimeBefore calling for service Cleaning and maintenance Specifications Options Remote control unitPicture Resizing*3 Frequency Quality Mode List of compatible signalsAppendix Display ScanningPin assignments Projection dimensions calculation methodsPin No Signal Pin assignments and signal names Using the Serial connectorCommunications settings ConnectionCable specifications Control commandsCommand Control Remarks Contents OthersTrademark acknowledgements Dimensions
Related manuals
Manual 6 pages 47.49 Kb

PT-LB10NTE, PT-LB10VE, PT-LB10SE, PT-LB10E specifications

The Panasonic PT-LB10 series, including the PT-LB10VE, PT-LB10E, and PT-LB10SE models, represents a blend of advanced projection technology and practical design, tailored for diverse applications from education to corporate environments. These portable projectors are characterized by their compact size, lightweight construction, and high-efficiency performance, making them suitable for both small classrooms and larger meeting spaces.

One of the standout features of the PT-LB10 series is its impressive brightness level, with outputs reaching up to 3,000 lumens. This ensures that images remain vibrant and clear, even in environments with ambient light. Additionally, the projectors boast a contrast ratio of up to 2000:1, which enhances depth and detail in presentations, making them ideal for displaying text, graphs, and images with clarity.

The PT-LB10 series employs LCD technology, providing sharp and accurate color reproduction. The three-LCD system results in rich colors and high image quality, suitable for a vast array of content types. The projectors feature a native XGA resolution (1024x768), which contributes to the sharpness and detail of projected images.

Another significant aspect of the PT-LB10 models is their user-friendly setup and operation. They come equipped with an automatic horizontal/vertical keystone correction feature, allowing users to quickly adjust the image distortion caused by angled projections. This is especially useful in dynamic environments where immediate adjustments may be necessary.

Connectivity options are abundant, with HDMI, VGA, and USB ports available for versatile input sources. The USB port also allows for easy plug-and-play presentations without the need for additional software, enhancing the convenience for users on the go.

Energy efficiency is a notable characteristic of the PT-LB10 series as well. The projectors incorporate an Eco Management feature, allowing for reduced power consumption and extending the life of the lamps, which can last up to 5,000 hours in eco mode.

Furthermore, the design ethos of these projectors focuses on portability, with each model weighing less than 3 kg. This makes them easy to transport between locations, a key requirement for educators and business professionals alike.

Overall, the Panasonic PT-LB10VE, PT-LB10E, and PT-LB10SE projectors are built for reliability and performance, catering to users who demand high-quality visuals and convenience, ensuring they meet various presentation needs effectively.