Panasonic PT-LB10E, PT-LB10VE manual Direct power off function, Power indicator, Projector status

Page 27

Direct power off function

You can disconnect the mains lead during projection or immediately after use and move the projector. The cooling fan will operate by the internal power supply to cool down the lamp.

BWhen this function is used, it may take more time for the lamp to turn back on again compared to when the lamp cools down with the mains lead connected.

BDo not put the projector in a bag while the cooling fan is operating.

CAUTION

If not using the projector for an extended period of time, disconnect the mains plug from the mains socket.

BIf dust builds up on the mains plug, the resulting humidity may damage the insulation, which could result in fire.

BThis projector continues to draw approximately 6 W of power even when the power is turned off.

Power indicator

Power indicator status

Projector status

Red

Illuminated

The projector is in standby mode and image projection

is possible by pressing the POWER button.

 

 

 

 

 

 

 

The projector is preparing for projection after the

 

Flashing

power is turned on while the power indicator is

Green

illuminated red. (After a short period, a picture will be

 

 

 

projected.)

 

Illuminated

A picture is being projected.

 

 

 

 

Illuminated

The lamp is cooling down after the power is turned

 

off. (The cooling fan is operating.)

 

 

Orange

 

The projector is preparing for projection after the

 

power is turned on while the power indicator is

 

Flashing

 

illuminated orange. (After a short period, a picture

 

 

 

 

will be projected.)

 

 

 

Basic Operation

ENGLISH-27

Image 27
Contents Model No. PT-LB10NTE LCD Projector Commercial UseModel number PT-LB10NTE / PT-LB10E / PT-LB10VE / PT-LB10SE Dear Panasonic CustomerPreparation For Your SAFETY, Please Read the Following Text Carefully Important the Moulded Plug U.K. onlyFuse Contents Precautions with regard to safety Do not overload the mains socketDo not remove the cover or modify it in any way Do not place liquid containers on top of the projector Do not handle the mains plug with wet handsInsert the mains plug securely into the mains socket Do not place the projector into water or let it become wetAlways disconnect all cables before moving the projector Do not use the projector in a bath or showerDo not look into the lens while the projector is being used Do not cover the air inlet port or the air outlet portInsulate the battery using tape or similar before disposal Do not put your weight on this projectorUse only the specified batteries PT-LB10NTE only AccessoriesBe sure to attach the lens cover before moving the projector Before useDo not touch the surfaces of the lens with your bare hands Wireless card PT-LB10NTE onlyWireless card slot PT-LB10NTE only Order to get the best picture qualityLeg adjuster buttons L/R Lens cover Projection lens Remote control signal receptorLocation and function of each part $%$ # Connector panel $ Air outlet portVideo in connector pages 22 # Power input socket ACRGB in connector pages 21 RGB OUT connectorMenu Remote control unit# RGB Input indicator $ Lamp indicatorInput buttons Temp indicatorAuto Setup button pages 25 Volume +/- buttons$ Wireless card access indicator Inserting the wireless card PT-LB10NTE onlyPT-LB10NTE only Wireless card # ConnectorProjection methods Setting-upProjection distances Projector positionConnections Connecting to computerET-ADSER Connecting to video equipmentInsert the battery holder Preparation for the remote control unitTurning on the power $Press the Power buttonTurn on the power of all connected devices Adjusting the focus Press the input select button to select the input signalAdjusting the angle Adjusting the size#Press the Power button Turning off the powerDirect power off function Power indicatorProjector status Press the Auto Setup button Pausing a picture Freeze Turning off the picture and sound momentarily ShutterPress the Freeze button Enlarging the picture D.ZOOM Adjusting the volume VolumeRemote control unit functions during D.ZOOM digital zoom Press the Volume +/- buttonPress the Index Window button Displaying two screens Index WindowKeystone On-screen menusMenu screens KeystoneKEY Auto POW.OFF Disable Auto Search Signal Keystn RGB/YP B P RSxga Mode OFF Blackboard Power HighSelect ADJ Menu operation guidePicture SelectPicture Returning a setting to the factory defaultPicture Mode StandardOperation Correcting keystone distortionVertical keystone distortion correction only VerticalAdjusting the picture Picture ModeDynamic Tint ContrastBright ColorTV-SYSTEM Auto Ntsc Still ModeSignal Mode TV-SYSTEMDOT Clock Adjusting the positionClock Phase PositionAspect Auto AspectFrame Lock ResizingOption settings Changing the display languageOSD Auto Keystn Auto SignalSxga Mode Auto SearchFRONT/REAR Lamp PowerBlackboard Back ColorControl KEY Power MemoryLamp Runtime FuncSecurity Setting up the security functionInput Passwd Amend PasswdText Change Text DisplayWEB Control DefaultNetwork Name ChangeRemedy Lamp indicator Temp indicatorLamp Power Lamp indicatorAir filter should be cleaned every 100 hours of use Cleaning and replacing the air filterCleaning Replacement procedureReplacing the lamp unit Lamp unit replacement periodLamp unit replacement procedure Runtime Time ResetLamp Power OPTION2Before calling for service Cleaning and maintenance Specifications Options Remote control unitDisplay Scanning List of compatible signalsPicture Resizing*3 Frequency Quality Mode AppendixProjection dimensions calculation methods Pin No SignalPin assignments Connection Using the Serial connectorPin assignments and signal names Communications settingsOthers Control commandsCable specifications Command Control Remarks ContentsTrademark acknowledgements Dimensions
Related manuals
Manual 6 pages 47.49 Kb

PT-LB10NTE, PT-LB10VE, PT-LB10SE, PT-LB10E specifications

The Panasonic PT-LB10 series, including the PT-LB10VE, PT-LB10E, and PT-LB10SE models, represents a blend of advanced projection technology and practical design, tailored for diverse applications from education to corporate environments. These portable projectors are characterized by their compact size, lightweight construction, and high-efficiency performance, making them suitable for both small classrooms and larger meeting spaces.

One of the standout features of the PT-LB10 series is its impressive brightness level, with outputs reaching up to 3,000 lumens. This ensures that images remain vibrant and clear, even in environments with ambient light. Additionally, the projectors boast a contrast ratio of up to 2000:1, which enhances depth and detail in presentations, making them ideal for displaying text, graphs, and images with clarity.

The PT-LB10 series employs LCD technology, providing sharp and accurate color reproduction. The three-LCD system results in rich colors and high image quality, suitable for a vast array of content types. The projectors feature a native XGA resolution (1024x768), which contributes to the sharpness and detail of projected images.

Another significant aspect of the PT-LB10 models is their user-friendly setup and operation. They come equipped with an automatic horizontal/vertical keystone correction feature, allowing users to quickly adjust the image distortion caused by angled projections. This is especially useful in dynamic environments where immediate adjustments may be necessary.

Connectivity options are abundant, with HDMI, VGA, and USB ports available for versatile input sources. The USB port also allows for easy plug-and-play presentations without the need for additional software, enhancing the convenience for users on the go.

Energy efficiency is a notable characteristic of the PT-LB10 series as well. The projectors incorporate an Eco Management feature, allowing for reduced power consumption and extending the life of the lamps, which can last up to 5,000 hours in eco mode.

Furthermore, the design ethos of these projectors focuses on portability, with each model weighing less than 3 kg. This makes them easy to transport between locations, a key requirement for educators and business professionals alike.

Overall, the Panasonic PT-LB10VE, PT-LB10E, and PT-LB10SE projectors are built for reliability and performance, catering to users who demand high-quality visuals and convenience, ensuring they meet various presentation needs effectively.