Panasonic PT-LB10E OPTION2, Runtime, Time Reset, DESK/CEILING Desk FAN Control Standard Lamp

Page 55

'Install the lamp unit cover, and then use a Phillips screwdriver to securely tighten the lamp unit cover fixing screws.

NOTE:

BBe sure to install the lamp unit and the lamp unit cover securely. If they are not securely installed, it may cause the protection circuit to operate so that the power cannot be turned on.

(Connect the mains lead.

)Press the POWER button so that a picture is projected onto the screen.

NOTE:

BIf the mains lead was disconnected during projection when the projector was used the last time, projection will start after the mains lead is connected (when “POWER MEMORY” in the “OPTION2” menu is set to “ON”). Refer to page 46 for details.

*Press the MENU button to display the “MAIN MENU”, and then press the F or G button to select “OPTION2”.

MENU

KEYSTONE

PICTURE

POSITION

INDEX WINDOW

SHUTTER

VOLUME

LANGUAGE

OPTION1

OPTION2

SECURITY

NETWORK

SELECTENTEREXIT

+Press the ENTER button to display the “OPTION2” menu, and then press the F or G button to select “LAMP RUNTIME”.

OPTION2

BACK COLOR BLUE

FRONT/REAR FRONT

DESK/CEILING DESK FAN CONTROL STANDARD

LAMP

POWER

HIGH

 

 

 

LAMP

RUNTIME

1820H

 

 

 

FUNC

1

INDEX

 

 

CONTROL KEY

ON

 

AUTO POW.OFF DISABLE

 

 

 

POWER

MEMORY

ON

 

 

SELECT

RETRN

,Press and hold the ENTER button for approximately 3 seconds.

OPTION2

BACK COLOR BLUE

FRONT/REAR FRONT

DESK/CEILING DESK

FAN CONTROL STANDARD

LAMP

POWER

HIGH

 

 

 

TIME

RESET

[POWER OFF]

 

 

 

FUNC

1

INDEX

CONTROL KEY

ON

 

AUTO POW.OFF DISABLE

 

 

POWER MEMORY

ON

 

 

SELECT

RETRN

The “LAMP RUNTIME” will change to “TIME RESET [POWER OFF]”.

NOTE:

BIf the MENU button is pressed, the lamp time resetting screen will be cancelled.

-Turn off the power.

This will reset the cumulative usage time for the lamp unit to “0”.

Refer to page 26 for details on how to turn off the power.

Care and maintenance

ENGLISH-55

Page 54 Page 56
Image 55
Page 54 Page 56
Contents Model No. PT-LB10NTE LCD Projector Commercial UseModel number PT-LB10NTE / PT-LB10E / PT-LB10VE / PT-LB10SE Dear Panasonic CustomerPreparation Important the Moulded Plug U.K. only For Your SAFETY, Please Read the Following Text CarefullyFuse Contents Do not overload the mains socket Precautions with regard to safetyDo not remove the cover or modify it in any way Do not place liquid containers on top of the projector Do not handle the mains plug with wet handsInsert the mains plug securely into the mains socket Do not place the projector into water or let it become wetAlways disconnect all cables before moving the projector Do not use the projector in a bath or showerDo not look into the lens while the projector is being used Do not cover the air inlet port or the air outlet portDo not put your weight on this projector Insulate the battery using tape or similar before disposalUse only the specified batteries PT-LB10NTE only AccessoriesBe sure to attach the lens cover before moving the projector Before useDo not touch the surfaces of the lens with your bare hands Wireless card PT-LB10NTE onlyWireless card slot PT-LB10NTE only Order to get the best picture qualityLens cover Projection lens Remote control signal receptor Leg adjuster buttons L/RLocation and function of each part $%$ # Connector panel $ Air outlet portVideo in connector pages 22 # Power input socket ACRGB in connector pages 21 RGB OUT connectorMenu Remote control unit# RGB Input indicator $ Lamp indicatorInput buttons Temp indicatorAuto Setup button pages 25 Volume +/- buttons$ Wireless card access indicator Inserting the wireless card PT-LB10NTE onlyPT-LB10NTE only Wireless card # ConnectorProjection methods Setting-upProjection distances Projector positionConnections Connecting to computerET-ADSER Connecting to video equipmentInsert the battery holder Preparation for the remote control unit$Press the Power button Turning on the powerTurn on the power of all connected devices Adjusting the focus Press the input select button to select the input signalAdjusting the angle Adjusting the size#Press the Power button Turning off the powerPower indicator Direct power off functionProjector status Press the Auto Setup button Turning off the picture and sound momentarily Shutter Pausing a picture FreezePress the Freeze button Enlarging the picture D.ZOOM Adjusting the volume VolumeRemote control unit functions during D.ZOOM digital zoom Press the Volume +/- buttonPress the Index Window button Displaying two screens Index WindowKeystone On-screen menusMenu screens KeystoneKEY Auto POW.OFF Disable Auto Search Signal Keystn RGB/YP B P RSxga Mode OFF Blackboard Power HighSelect ADJ Menu operation guidePicture SelectPicture Returning a setting to the factory defaultPicture Mode StandardOperation Correcting keystone distortionVertical keystone distortion correction only VerticalPicture Mode Adjusting the pictureDynamic Tint ContrastBright ColorTV-SYSTEM Auto Ntsc Still ModeSignal Mode TV-SYSTEMDOT Clock Adjusting the positionClock Phase PositionAspect Auto AspectFrame Lock ResizingChanging the display language Option settingsOSD Auto Keystn Auto SignalSxga Mode Auto SearchFRONT/REAR Lamp PowerBlackboard Back ColorControl KEY Power MemoryLamp Runtime FuncSecurity Setting up the security functionInput Passwd Amend PasswdText Change Text DisplayWEB Control DefaultNetwork Name ChangeRemedy Lamp indicator Temp indicatorLamp Power Lamp indicatorAir filter should be cleaned every 100 hours of use Cleaning and replacing the air filterCleaning Replacement procedureReplacing the lamp unit Lamp unit replacement periodLamp unit replacement procedure Runtime Time ResetLamp Power OPTION2Before calling for service Cleaning and maintenance Specifications Options Remote control unitDisplay Scanning List of compatible signalsPicture Resizing*3 Frequency Quality Mode AppendixPin No Signal Projection dimensions calculation methodsPin assignments Connection Using the Serial connectorPin assignments and signal names Communications settingsOthers Control commandsCable specifications Command Control Remarks ContentsTrademark acknowledgements Dimensions
Related manuals
Manual 6 pages 47.49 Kb

PT-LB10NTE, PT-LB10VE, PT-LB10SE, PT-LB10E specifications

The Panasonic PT-LB10 series, including the PT-LB10VE, PT-LB10E, and PT-LB10SE models, represents a blend of advanced projection technology and practical design, tailored for diverse applications from education to corporate environments. These portable projectors are characterized by their compact size, lightweight construction, and high-efficiency performance, making them suitable for both small classrooms and larger meeting spaces.

One of the standout features of the PT-LB10 series is its impressive brightness level, with outputs reaching up to 3,000 lumens. This ensures that images remain vibrant and clear, even in environments with ambient light. Additionally, the projectors boast a contrast ratio of up to 2000:1, which enhances depth and detail in presentations, making them ideal for displaying text, graphs, and images with clarity.

The PT-LB10 series employs LCD technology, providing sharp and accurate color reproduction. The three-LCD system results in rich colors and high image quality, suitable for a vast array of content types. The projectors feature a native XGA resolution (1024x768), which contributes to the sharpness and detail of projected images.

Another significant aspect of the PT-LB10 models is their user-friendly setup and operation. They come equipped with an automatic horizontal/vertical keystone correction feature, allowing users to quickly adjust the image distortion caused by angled projections. This is especially useful in dynamic environments where immediate adjustments may be necessary.

Connectivity options are abundant, with HDMI, VGA, and USB ports available for versatile input sources. The USB port also allows for easy plug-and-play presentations without the need for additional software, enhancing the convenience for users on the go.

Energy efficiency is a notable characteristic of the PT-LB10 series as well. The projectors incorporate an Eco Management feature, allowing for reduced power consumption and extending the life of the lamps, which can last up to 5,000 hours in eco mode.

Furthermore, the design ethos of these projectors focuses on portability, with each model weighing less than 3 kg. This makes them easy to transport between locations, a key requirement for educators and business professionals alike.

Overall, the Panasonic PT-LB10VE, PT-LB10E, and PT-LB10SE projectors are built for reliability and performance, catering to users who demand high-quality visuals and convenience, ensuring they meet various presentation needs effectively.
Top Page Image Contents