Troubleshooting
Symptom | Possible Problem | Solution | |
Unit does not turn on | AC adaptor isn't plugged into a working wall | Plug the AC adaptor into a working wall socket and plug the connector | |
| socket or not plugged into the power supply | into the supply jack on the unit | |
| jack on back of the unit |
| |
Unit doesn’t respond | Unit requires a reset | If unit is plugged in and doesn't respond, try resetting the unit by | |
|
| following these steps: | |
|
| a) remove iPad/iPhone/iPod from dock | |
|
| b) unplug unit from power source | |
|
| c) remove back up batteries | |
|
| d) wait a few minutes, replace batteries, plug in, then resume use | |
| iPad/iPhone/iPod is not docked properly | Remove your iPad/iPhone/iPod from the dock and check for obstruction | |
|
| on the connectors in the dock and on your iPad/iPhone/iPod. Then | |
|
| reseat it in the dock. | |
Battery Low icon | Batteries are weak | Replace with new batteries | |
always flashing |
|
| |
Batteries were not installed properly | Check to make sure the polarity ( + and – ends) matches the diagram | ||
| |||
|
| in the battery compartment | |
|
|
| |
iPad/iPhone/iPod does | iPad/iPhone/iPod is not docked properly | Remove your iPad/iPhone/iPod from the dock and check for obstruction | |
not respond to the |
| on the connectors in the dock and on your iPad/iPhone/iPod. Then | |
unit/iPod is playing but |
| reseat it in the dock. | |
no sound comes out | Your iPad/iPhone/iPod software is too old | Upgrade software on your iPad/iPhone/iPod via iTunes on your | |
| |||
|
| computer | |
| iPad/iPhone/iPod is locked up/plays but no | Check the volume setting. Make sure your iPad/iPhone/iPod is working | |
| sound comes out | properly before docking into the unit. Please refer to your iPad/iPhone/iPod | |
|
| manual for details. See above for software upgrade information. | |
|
| You may need to reset your iPad/iPhone/iPod. Refer to your iPad, iPhone | |
|
| or iPod user guide for details on how to perform a reset. | |
|
|
| |
| Using 1st or 2nd generation iPod, iPod Shuffle or | This system cannot control those iPod models or other devices. | |
| other devices. |
| |
Unit/iPad/iPhone/iPod | The unit is reacting to external interference | Move unit away from potential sources of external interference such as | |
performance is erratic |
| computers, modems, wireless devices (routers) or fluorescent light. | |
No sound from unit | Volume is set too low on unit | Make sure volume is turned up | |
|
|
| |
iPad/iPhone/iPod | iPad/iPhone/iPod is not installed properly | Remove your iPad/iPhone/iPod from the dock and check for obstruction | |
didn’t charge up |
| on the connectors in the dock and on your iPad/iPhone/iPod. Then | |
|
| reseat it in the dock. | |
| iPad/iPhone/iPod is locked up/ frozen | Please make sure your iPad/iPhone/iPod is working properly before | |
| iPad/iPhone/iPod battery has problem | docking into the unit. Please refer to your iPad/iPhone/iPod manual for | |
| details. | ||
|
| ||
|
|
| |
Time sync didn’t work | Older iPod models such as iPod mini do not | Make sure you are using a properly docked iPad, iPhone or newer | |
| support time sync function | iPod such as touch, nano or classic. If not available, set time manually | |
|
| (see page 3). | |
|
|
|
9