Using the unit
Using the Alarms
This unit has a dual alarm system so you can set two separate alarms to different alarm times,
Setting the Alarms
Note: Alarm 1 and Alarm 2 are set the same way; Alarm Button below means the button ( 
or 
) for whichever alarm you are setting.
1.Press and hold the 
or 
Button until the alarm time flashes on the lower part of the display. Press and release the + or - Button to set the alarm time (press and hold for faster setting). Remember to set the correct AM or PM time.
2.Press and release the Alarm Button again to confirm the set alarm time, then press and release the + or - Button to set the alarm schedule (’wake 7 days’ = the whole week, ‘wake weekdays’ = Monday through Friday, ‘wake weekend’ = Saturday and Sunday only).
3.Press and release the Alarm Button again, then press and release the + or - Button to select an alarm source to wake to: (iPod, Radio, Buzzer or Playlist).
For wake to iPod: select iPod to wake to a docked iPad, iPhone or iPod. If the unit does not detect an iPad/iPhone/iPod at the set alarm time, the unit will default to buzzer alarm. The alarm cycle lasts for one hour; make sure you have enough music on your iPhone or iPod to last that long.
For wake to radio: after selecting Radio as wake to source, press and release the Alarm Button and press and release the + or - Button to select a radio station or press and release the Preset Button to wake to a preset radio station (see Listening to Radio on page 5 for details on setting radio stations and presets).
For wake to playlist: you must create a playlist named “iHome” in iTunes and have it on your iPod/iPhone. The unit will play music randomly from within the “iHome” playlist.
4.Press and release the Alarm Button again, then press and release the + or - Button to set the alarm volume.
5.Press and release the Alarm button again (or no button within 10 seconds) to exit the alarm setting mode. The alarm will be armed once set and the corresponding alarm icon will light up. The lower part of the display will show the earliest set alarm time.
Reviewing, Arming and Disarming Alarm (Turn Alarm Function On and Off)
Alarms are automatically armed when set. Active alarms are indicated by alarm icons on the display.
1.Once an alarm is armed, the lower part of the display will show the alarm time. If more then one alarm is armed, the earliest alarm time will show.
2.To review the alarm time, press an alarm button once. The related alarm time and wake source will show on the lower part of the display.
3.During alarm review, press and release the Alarm Button once to toggle it on or off. If the alarm is armed, the related alarm icon will light up.
Resetting the Alarm to Come on the Next Day
1.When the alarm is sounding, press and release the 
Button to stop the alarm and reset it to come on the next set day. For example, if alarm is set for weekdays and you press and release the alarm reset on Friday, the alarm will come on again on Monday, not Saturday.
4