Using the unit
Snooze Operation
1.Default snooze time is 9 minutes. To program a custom snooze time, press and hold the Snooze Button during normal operation (when alarm is not sounding) until the snooze minutes display appears. Press and release the + or - Button to set the snooze timer from 1 to 29 minutes. Press and release the Snooze/Dimmer Button to exit snooze setting mode.
2.Press and release the Snooze/Dimmer Button after an alarm sounds. The alarm will be silenced for the set snooze duration time then sound again. Snooze can be pressed several times during the 1 hour alarm cycle.
Sure Alarm
The unit has a sure alarm feature. If
Tip: Download the free iHome Set app for advanced alarm, snooze and sleep functions.
Charging your iPad/iPhone/iPod
1.Gently dock your iPad, iPhone or iPod. While an iPad/iPhone/iPod is docked in the unit and the unit is connected to AC power, it recharges (until fully charged).
Listening to iPad/iPhone/iPod
1.Dock the already playing iPad/iPhone/iPod in Dock. The unit will automatically turn on and you will hear the music playing from your iPad/iPhone/iPod.
Note: If the playing song volume is too low on the iPad/iPhone/iPod, the unit may not detect iPod is in play mode. Press and release the 
Button to play it.
2.When an iPad/iPhone/iPod is docked and in standby mode, press and release the 
Button to play it. “iPod” will appear on the display to indicate iPod playing mode.
3.Press and release the 
Button again to pause play; press again to resume it.
4.Press and release the + or - Button to skip to the next or previous track on your iPhone/iPod. Press and hold the + or
-Button to search within a track.
5.Press and release the 
or 
to adjust the system volume.
6.Press and release the EQ Button as needed to select Treble, Bass, Balance or 3D Sound, then press and release the + or - Button to adjust settings .
7.To turn off the unit, press and release the 
Button. iPad/iPhone/iPod will continue charging while docked.
Listening to Radio
Setting up Antenna
Extend FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas.
Tuning and Playing the Radio
1.Press and release the Mode Button as needed to turn on the unit and cycle through iPod, FM radio and
2.When the FM mode is selected, press and release the + or - Button to tune the radio to a desired station. The current radio frequency appears in the lower right of the display. Press and hold for 2 seconds then release the + or - Button to scan for the next clear station.
5