Zebra Technologies manual Xi4/RXi4 Quick Reference Guide, Printer Components

Page 1

Xi4™/RXi4™ Quick Reference Guide

Use this guide to operate your printer on a daily basis. For more detailed information, refer to the User Guide.

Printer Components

Figure 1 shows the components inside the media compartment of your printer. Depending on printer model and the installed options, your printer may look slightly different. Familiarize yourself with these components before continuing with the printer setup procedure.

Figure 1 • Printer Components

3 4 5

2

1

6

A

7

8

B

9

C

7

8

1	Platen roller
2	Control panel
3	Printhead assembly
4	Printhead-open lever
5	Ribbon take-up spindle
6	Ribbon supply spindle

* Determined by printer model. See A, B, or C.

7	Media supply guide*
8	Media supply hanger*
9	Media spindle*
A	Used in 110Xi4/R110Xi4 200 dpi and
	300 dpi models.
B	Used in 110Xi4/R110Xi4 600 dpi models.
C	Used in all other Xi4 models.

© 2010 ZIH Corp. All product names and numbers are Zebra	P1008806-002
trademarks, and Zebra and the Zebra logo are registered	3/8/10

trademarks of ZIH Corp. All rights reserved.

Image 1

Contents Printer Components Xi4/RXi4 Quick Reference GuideLCD Control PanelCalibrates the printer for the following Preparing the Printer for Use To set up the printer, complete these stepsPreparing the Printer for Use Preparing the Printer for Use Preparing the Printer for Use Xi4 RXi4 To load roll media in Tear-Off mode, complete these steps Load Media110Xi4/R110Xi4 600 dpi 110Xi4/R110Xi4 200 dpi and 300 dpi Other Xi4 Models Load Media Ribbon OUT error Load Media Load Media To load ribbon, complete these steps Load RibbonIf… Then… Does your printer have a ribbon dancer assembly? Then Load Ribbon Load Ribbon To remove used ribbon, complete these steps Remove Used Ribbon