Zebra Technologies RXi4 manual Remove Used Ribbon, To remove used ribbon, complete these steps

22

Load Ribbon

Remove Used Ribbon

Remove used ribbon from the ribbon take-up spindle each time you change the roll of ribbon.

To remove used ribbon, complete these steps:

1.Has the ribbon run out?

If the ribbon...	Then
Ran out	Continue with the next step.
Did not run out	Cut or break the ribbon before the ribbon take-up spindle.

2.While holding the ribbon take-up spindle, turn the ribbon release knob clockwise until it stops.

The ribbon release bars pivot down, easing the spindle’s grip on the used ribbon.

3.Slide the used ribbon off of the ribbon take-up spindle and discard.

P1008806-002 Xi4™/RXi4™ Quick Reference Guide 3/8/10