8
Preparing the Printer for Use
c.Press PLUS (+) to select PRINT.
If the media and ribbon are loaded correctly, a printer configuration label prints. A sample label is shown here.
Xi4 | RXi4 |
d. To exit Setup mode, press SETUP/EXIT, and then press NEXT/SAVE.
12.To test the connection between your printer and your computer, use a label design package to create a sample label and send it to the printer. Zebra recommends ZebraDesigner Pro. You can download this software from http://www.zebra.com/software and operate it in Demo mode to print a sample label.
Xi4™/RXi4™ Quick Reference Guide | 3/8/10 |