Zebra Technologies ZT400 Wired internalwired.ip.protocol, Wireless wlan.ip.protocol, Wlan.essid

78

Printer Configuration and Adjustment

Adjust Printer Settings

Table 3 • Network Settings (Continued)

IP Protocol	This parameter tells if the user (permanent) or the server (dynamic) selects the
	IP address. When a dynamic option is chosen, this parameter tells the method(s) by
	which the wired or wireless print server receives the IP address from the server.
	Accepted values:	•	ALL
		•	GLEANING ONLY
		•	RARP
		•	BOOTP
		•	DHCP
		•	DHCP & BOOTP
		•	PERMANENT
	Related ZPL command(s):	^ND
	SGD command used:	Wired: internal_wired.ip.protocol
		Wireless: wlan.ip.protocol
	User menu item:	WIRED IP PROTOCOL on page 103
	Printer web page:	View and Modify Printer Settings >
			Network Communications Setup >
			TCP/IP Settings
MAC Address	View the Media Access Control (MAC) address of the print server that is installed in the
	printer (wired or wireless).
	Accepted values:	N/A
	Related ZPL command(s):	none
	SGD command used:	Wired: internal_wired.mac_addr
		Wireless: wlan.mac_addr
	User menu item:	WIRED MAC ADDRESS on page 103
	Printer web page:	View and Modify Printer Settings >
			Network Communications Setup >
			Wireless Setup
ESSID	The Extended Service Set Identification (ESSID) is an identifier for your wireless
	network. This setting, which cannot be modified from the control panel, gives the
	ESSID for the current wireless configuration.
	Accepted values:	32-character alphanumeric string (default 125)
	Related ZPL command(s):	none
	SGD command used:	wlan.essid
	User menu item:	ESSID on page 105
	Printer web page:	View and Modify Printer Settings >
			Network Communications Setup >
			Wireless Setup

P1066582-002 ZT400 Series™ User Guide 4/8/14