Zebra Technologies ZT400 manual Set the Head-Close Action, Set the Head-Open Light Action

98

Printer Configuration and Adjustment

User Menus—TOOLS Menu

HEAD CLOSE ACTION

▼ CALIBRATE ▲

Set the Head-Close Action

Set the action for the printer to take when you close the printhead. See Head-Close Action on page 73 for more information.

HEAD OPEN LIGHT

▼ HIGH▲

Set the Head-Open Light Action

Set the brightness of the light that turns on when the printhead is open.

COVER OPEN LIGHT

▼ HIGH▲

Set the Cover Open Light Action

Set the brightness of the light that turns on when the media door is open.

LOAD DEFAULTS

▼ FACTORY ▲

LOAD

MEDIA/RIBBON CAL

START

Load Printer Defaults*

Use this menu item to restore all settings other than the network settings back to the factory defaults. Use care when loading defaults because you will need to reload all settings that you changed manually.

See Load Defaults on page 74 for more information.

* Other options are available by scrolling.

Calibrate the Media and Ribbon Sensors

Use this menu item to adjust the sensitivity of the media and ribbon sensors.

See Media and Ribbon Sensor Calibration on page 75 for more information. For instructions on how to perform a calibration procedure, see Calibrate the Ribbon and Media Sensors

on page 119.

P1066582-002 ZT400 Series™ User Guide 4/8/14