PPPoE Connection Setup
PPP Settings
Option | Description |
Username: | Enter the username provided by your |
| ISP. |
Password: | Enter the password provided by your |
| ISP. |
Idle Timeout: | Idle timeout means the router will |
| disconnect after being idle for a preset |
| amount of time. The default is 60 sec- |
| onds. If you set the time to 0, the ADSL |
| connection will remain always connected |
| to the ISP. |
Keep Alive: | If mode is LCP, This is the Keep Alive |
| timer. If a reply to the LCP echo is not |
| received in this amount if time, the con- |
| nection is dropped. The Default is 10. |
Authentication: | Default is Auto. However, if your ISP |
| asks you to specify the authentication |
| type, you can select it here (CHAP or |
| PAP). |
MTU | Maximum Transmission Unit indicates |
| the largest packet size in bytes that the |
| modem transmits. Any packets larger |
| than the MTU setting are fragmented |
| into smaller packets before being trans- |
| mitted. |
NB5Plus4/W User Guide | YML754Rev1 |
30 | www.netcomm.com.au |