DHCP Connection Setup
Option | Description |
Encapsulation: | Select the method of encapsulation |
| used by your ISP from the |
| list box. Choices vary depending on the |
| mode you select in the Mode field. |
IP Address: | The IP address assigned by an external |
| DHCP server. |
Mask: | The subnet mask assigned by an exter- |
| nal DHCP server. |
Gateway: | The gateway assigned by your DHCP |
| server. |
Default Gateway: | Enable this if you want to use this pro- |
| file connection as the default gateway |
| for clients to connect to the Internet. |
Bridge Settings |
|
Encapsulation: | Select the method of encapsulation |
| used by your ISP from the |
| list box. Choices vary depending on the |
| mode you select in the Mode field. |
Select LAN: | Select the LAN group to which you want |
| to bridge this connection to. Having a |
| Bridged Connection places the modem |
| into a ‘dumb’ mode. The modem con- |
| nects to the ISP, but does not perform |
| authentication, routing or firewalling |
| functions. You will need to have an addi- |
| tional router plugged into a LAN port of |
| your modem to perform these functions. |
YML754 Rev1 | NB5Plus4/W User Guide |
www.netcomm.com.au | 5 |