Nortel Networks BSGX4e Acronyms and Abbreviations, IP Address, Subnet Mask, Gateway DNS Server

Page 12

Terminology

1 Introduction and preparation

 

 

 

IP Address

(self IP)

Subnet Mask

(mask or netmask)

Gateway

DNS Server

The network (IP) address of any device connected to a local network or the Internet. The format is 148.174.89.25. Each of the four numbers in the address has a range of 0-255.

See the IP listing in Acronyms and Abbreviations.

This mask helps Internet traffic route through networks and subnetworks, and defines the range of addresses that can be used when creating a subnetwork. The format is the same as an IP address, but typically ends with 0:

148.174.0.0.

A device that connects one network to another. This typically involves converting raw data into an IP protocol, or converting one protocol to another protocol.

A system for converting domain names into IP addresses. For example, www.webpage.com is translated to 142.178.15.12.

Acronyms and Abbreviations

ADSL – Asymmetric Digital Subscriber Line is an Internet technology that uses the telephone line to transmit Internet data at broadband speeds. “Asymmetric” means the download speed is faster than the upload speed.

DHCP – Dynamic Host Configuration Protocol is a service that automatically assigns temporary IP addresses to network equipment.

DNS – Domain Name System is a service that converts host names and domain names into IP addresses. For example, a Web URL of www.someplace.com is translated to an IP address such as 140.178.12.56 on the Internet.

FQDN – A Fully Qualified Domain Name is similar to the common Web URL we all use for surfing the Web. Its format typically looks like some.domain.com or just domain.com.

IP (address) – Internet Protocol is commonly used in this document to indicate an address on the Internet. It consists of four numbers separated by periods. For example, 140.178.12.56. Each of these four number must be 0 through 255. Every device on the Internet (including the BSGX4e, computers, and IP phones) has an IP address.

A dynamic address is temporary and is assigned by a DHCP server. A static address is permanent and is manually set in the device.

LAN – A Local Area Network is a technical term for a collection of PCs, IP phones, and other devices that you connect to BSGX4e’s 1–4 ports.

PPPPoint-to-Point Protocol is a popular network protocol for establishing a direct connection between your computer and your service provider. If PPP includes encapsulation schemes, the designation is, for example PPPoE or PPPoHDLC.

PVC – A Permanent Virtual Circuit establishes a permanent, long-term connection directly between your BSGX4e and another network device, such as a switch or server. A PVC has to be ordered from your service provider.

13

NN47928-311

Image 12
Contents Initial Setup Guide BSGX4e TrademarksContents List of Figures List of Tables Introduction and Preparation Hardware notice IntroductionWho should use the Initial Setup Wizard? What does the Initial Setup Wizard do?What is the BSGX4e? BSGX4e Cable Type Connector Connector Type Getting startedCables Internet-Side Cables and Wiring Cable Modem ConnectionsPreliminary Information Analog Fax or PhoneTerminology Standard Internet Connection ParametersWizard Field Description Acronyms and Abbreviations IP AddressSubnet Mask Gateway DNS ServerHow to get help Getting help over the phone from a Nortel Solutions CenterGetting help from the Nortel Web site Getting help through a Nortel distributor or reseller Connecting to BSGX4E Browser requirementsInitial connections 192.168.1.1 Wizard navigation and features Password PlsChgMeConfiguration overview Configuration Page FeaturesConfiguration overview Connecting to BSGX4e Configuration process Wizard PagesSntp IP/FQDN No configuration is required LAN Interface Background Variable ValueMyspeed.visualware.com QoS Groups Voice over IP Setup Backup configuration file Configuration is completeRestoring a backup configuration file Index NumericsSIP