Nortel Networks N300 Default settings, Restore Factory Default Settings, Connecting the 3G15Wn

NetComm Gateway Series - ADSL2+/3G Wireless N300 4-Port Modem Router

Default settings

LAN (Management)

Static IP Address:	192.168.1.1
Subnet Mask:	255.255.255.0
Default Gateway:	192.168.1.1

WAN (Internet)

WAN mode:

Wireless

SSID:

Channel:

Security:

WEP Key:

Interface Access

DHCP

NetComm Wireless

auto

WEP, 64bit

a1b2c3d4e5

Username:

Password:

admin

admin

Restore Factory Default Settings

Restoring factory defaults will reset the 3G15Wn to its factory default configuration. Occasions may present themselves where you need to restore the factory defaults on your 3G15Wn such as:

•You have lost your username and password and are unable to login to your 3G15Wn’s web configuration page;

•You have purchased your 3G15Wn from someone else and need to reconfigure the device to work with your ISP;

•You are asked to perform a factory reset by NetComm Support staff

In order to restore your 3G15Wn to its factory default settings, please follow these steps:

•Ensure that your 3G15Wn is powered on (for at least 10 seconds);

•Use a paper clip or a pencil tip to depress the reset button for ten seconds and release. At this point, the reset is in progress. Do not power off the unit at this point;

•When indicator lights return to steady green, reset is complete. The default settings are now restored. The entire process takes about 45 seconds to complete;

•Once you have reset your 3G15Wn to its default settings you will be able to access the device’s configuration web interface using http://192.168.1.1 with username ‘admin’ and password ‘admin’;

Connecting the 3G15Wn

Telephone

Exchange

ADSL2+

3G USB Modem

300Mbps Wireless Link

3G Tower

3G15Wn

LAN 1 LAN 2 LAN 3 LAN 4

YML15WN	aDSL2+/3G Wireless N300 4-Port Modem Router
www.netcomm.com.au	13