Nortel Networks N300 manual Lan

Page 40

LAN

This screen allows you to configure the Local Area Network (LAN) interface on your Router.

See the field descriptions below for more details.

Option	Description

IP Address	Enter the IP address for the LAN interface

Subnet Mask	Enter the subnet mask for the LAN interface

Enable IGMP Snooping	Enable by ticking the box
	Standard Mode: In standard mode, multicast traffic will flood to all bridge ports
	when no client subscribes to a multicast group.
	Blocking Mode: In blocking mode, the multicast data traffic will be blocked.
	When there are no client subscriptions to a multicast group, it will not flood to
	the bridge ports.

Enable LAN side Firewall	Check box to enable Firewall on LAN

Disable DHCP Server	Disables the DHCP server. Only to be done if Static IP address is set up

Enable DHCP Server	Select Enable DHCP server and enter your starting and ending IP addresses
	and the lease time. This setting configures the router to automatically assign IP,
	default gateway and DNS server addresses to every DHCP client on your LAN

Enable DHCP Server Relay	To relay DHCP requests from the subnet with no DHCP server on it to a DHCP
	server on other subnets. DHCP Server Relay is disabled by default. To access
	enable DHCP relay, please un-tick NAT enable first, that means to disable NAT
	first, and then press save button.

Configure the second IP Address	Configure a second IP address by ticking the checkbox shown below and enter
and Subnet Mask for LAN	the following information:
Interface	Enter the secondary IP address for the LAN interface.
	Enter the secondary subnet mask for the LAN interface.

ADSL2+/3G Wireless N300 4-Port Modem Router	ymL15WN
40	www.netcomm.com.au

Image 40

Contents User Guide Preface Important Safety InstructionsSave Our Environment Table of Contents Status Introduction Your 3G15Wn ADSL2+/3G Wireless N300 4-Port Modem Router Package contentsKey features IntroductionPlacement Placement Placement of your 3G15WnRouter placement Avoid obstacles and interferenceChoose the quietest channel for your wireless network Product Layout Product Layout Getting to know your 3G15WnMinimum system requirements Do I need a micro filter?Restore Factory Default Settings Default settingsConnecting the 3G15Wn Quick Setup Login to the web interfaceConnecting with 3G Connecting With AdslConfiguring 3G backup USB Storage Wireless Quick SetupUSB Print Server Establishing a Wireless Connection PasswordsTroubleshooting Web User Interface Web User Interface What can you do from here? Logging into the user interfaceBasic Basic HomeWAN IP Address 3G Settings 3G Settings 3G WAN ServicePIN Configuration 3G Interface3G Backup Config Option DescriptionWireless Wireless Setup/BasicConfiguration SecurityClick Save/Apply to set the advanced wireless configuration Cable and add the wireless device’s MAC address MAC filterWireless bridge Station infoManagement Device Settings BackupUpdate Restore DefaultUpdate Firmware SnmpTR-069 client ACS URLAccess Control ServicesSave/Reboot Advanced Advanced WAN serviceATM interface LAN Port Forwarding Port TriggeringTrigger Port End IP Filtering Outgoing IP FilterIncoming IP Filter Time Restriction Parental ControlURL filter Quality of Service Queue configurationQoS classification Routing Default gatewayStatic route Policy routing Dynamic routerDNS server Dynamic DNSUPnP DNS proxyUSB Storage Print ServerInterface grouping LAN portsStatus Diagnostics StatusSystem Log LogStatistics LANATM Consult the table that follows for field descriptions Route Select Route to display the paths the Router has foundAppendix Appendix a Print Server For Windows XPHttp//192.168.1.1/printers/printername and click Next For Mac OSX Select your printer from the Print Using drop down list Http//192.168.1.1631/printers/samsung Samsung on htp//192.168.1.1631 Appendix B USB Storage For Windows Vista Product Warranty Legal & Regulatory InformationCustomer Information GNU General Public LicenseLimitations of Warranty Product Warranty Technical Support