NetComm Gateway Series - ADSL2+/3G Wireless N300
UPnP
Simply check or uncheck the box and press Apply/Save to enable or disable the UPnP protocol
DNS proxy
To enable DNS Proxy, tick the corresponding checkbox and then enter host and Domain name, as the example shown below. Click Apply/Save to continue.
The Host Name and Domain name are combined to form a unique label that is mapped to the router IP address. This can be used to access the WebUI with a local name rather than by using the router IP address.
The figure below shows an example of this which is the default setting.
YML15WN | aDSL2+/3G Wireless N300 |
www.netcomm.com.au | 51 |