Nortel Networks 380-24F manual Setting console, Telnet, and Web passwords, Console password

Chapter 4 Web management interface basics 71

Setting console, Telnet, and Web passwords

1From the main menu, select Administration > Security.

2On the Security page list, click Console, Telnet, or Web. The selected password management page opens (Figure 37).

Note: The title of the page indicates which type of access you are setting the password for. In Figure 37, the network administrator selected Administration > Security > Console.

Figure 37 Console password page

3Choose the type of password:

•None—specifies no password for this type of access

•Local Password—sets a password for access through direct network connection or a direct Console port connection

•RADIUS Authentication—sets a password for remote dial-in. If you select this password type, you must also set up RADIUS authentication from the Radius management page.

4Type the password for read-only and read/write user access.

5Click Submit to save the changes.

Getting Started with the BayStack 380-24F Gigabit Switch Management Software