25
Chapter 3
Installing the Passport 8250 device
This section provides the following procedures for installing the Passport
8250 device:
1“Mounting the chassis in a rack” (page 25).
2“Connecting cables to the ports” (page 29).
3“Connecting the dual power supply” (page 33).
4“Securing the cables to the rack” (page 35).
Mounting the chassis in a rack
The Passport 8250 device can be mounted on the following racks:
•19 “ rack. For details, see “Mounting the Passport 8250 device on a 19” rack” (page 26).
•New equipment building system (NEBS) rack. For details, see “Mounting the Passport 8250 device on a NEBS or ETSI rack” (page 28).
•European Telecommunication Standards Institute (ETSI) rack. For details, see “Mounting the Passport 8250 device on a NEBS or ETSI rack” (page 28).
Safety precautions
Mount the Passport 8250 device using the following safey precautions:
•Do not place the device in direct sunlight, near warm air exhausts or heaters.
•Do not place the device around water.
Passport 8250 Installation Guide R2.2