Nortel Networks 241-5101-200, 8250 manual Securing the cables to the rack

Page 35

Chapter 3 Installing the Passport 8250 device 35

The central contact is designated as the chassis ground.

Centre contact of the power input connector is designated for the product earth.

4Connect the -48v power supply cable with the male 3W3-D connector to the female 3W3-D connector.

Tighten the screws on the 3W3-D connector and verify that the connector is secured to chassis of power supply.

5Repeat steps 1 to 4 for the other power supply module.

6Connect the power supply modules with the recommended wiring harness to the branch circuit of the power distribution system.

7Configure the electrical branch circuit providing power to the Passport as follows:

•A double-pole disconnect switch which isolates both the power feed and return conductors. A separate switch shall be provided for each separate power feed to the equipment.

•The branch circuit protection shall be located in the ungrounded conductor and be rated at no larger than 30A.

•The equipment protective grounding conductor shall be permanently connected to the protective earthing conductor in the building electrical distribution system.

8Connect to the power unit with the recommended wiring harness to the branch circuit of the power distribution system.

9Apply branch circuit power.

Securing the cables to the rack

Do not block air vents, field-replaceable modules, and LEDs with cables when connecting the cables to the ports.

Passport 8250 Installation Guide R2.2

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Installation Page Guide InstallationPage October Publication historyPublication history 241-5101-200 R2.2 Contents Chapter Configuring the Passport 8250 for operations Chapter Preparing for the hardware installationChapter Installing the Passport 8250 device Index ContentsAppendix a Replacing hardware Appendix B LEDs Appendix C StandardsContents 241-5101-200 R2.2 How this guide is organized About this documentWho should read this guide What you need to knowDocumentation conventions ConventionsPassport documents Symbol conventionsRelated documents NMS documents Nortel support servicesPassport 8250 functions Chapter PassportPassport 8250 device Passport 8250 hardwarePassport 8250 front panel Board modulesFan module Dual power supply modulesCommunication ports Software compatibility Passport 8250 softwarePassport 241-5101-200 R2.2 Selecting an installation site Chapter Preparing for the hardware installationRisk damage to the equipment Unpacking the Passport 8250 shipmentTaking inventory of the Passport 8250 shipment Inventory checklist Options available Code # Getting the tools to mount the chassis in a rack Mounting the chassis in a rack Chapter Installing the Passport 8250 deviceSafety precautions Ventilation space Mounting the Passport 8250 device on a 19 rackAttaching mounting brackets to chassis Installing the chassis on a 19 rackMounting the Passport 8250 device on a Nebs or Etsi rack Installing the chassis on a Etsi or NEBs rackDS-1 / E1 port connections Connecting cables to the portsConnecting the DS-1/E1 ports DS-1/E1 pin assignment Description Signal Pin Connecting the ethernet port Connecting the serial port Connecting the ATM uplink port Connecting the dual power supplyAntistatic protection Dual power supplySecuring the cables to the rack Cables left of chassis Cables underneath chassis Starting the Passport 8250 device and logging into the CLI Chapter Configuring the Passport 8250 for operationsLogging into the CLI Breaker is off. Turn to on Configuring the Passport 8250 device for remote accessBoot command parameters Boot parameter Description Viewing the boot parametersSetting the boot parameters Configuring the clocking scheme Clockconfig command parameters Parameter Values Definition Example Setting the clocking scheme to External PrimaryE1-1clockconfig set Setting the clocking scheme to ExternalSecondarySetting the reference clock to internal Field-replaceable modules Appendix a Replacing hardwareRemoving a power supply module Replacing a power supply moduleReplacing a board module Board slots Rotating fan Replacing the fan modulePassport 8250 board guidelines Confirm that the fan LED is off 241-5101-200 R2.2 Appendix B LEDs Passport 8250 Leds Service boards Network board Fan module Power supplyLEDs description Color Description Appendix B LEDs 241-5101-200 R2.2 Electromagnetic compatibility standards Product safety standardsAppendix C Standards Regulatory information standards Thermal, mechanical, and power standardsTelecom standards Industry Canada Notice Equipment attachment limitation Federal Communications Commission FCCAppendix C Standards Index Index 241-5101-200 R2.2 Page Installation

241-5101-200, 8250 specifications

Nortel Networks 8250, model 241-5101-200, is a prominent component in the realm of telecommunications and networking equipment. Designed for high-performance networking solutions, the 8250 plays a crucial role in delivering reliable voice and data services across various applications. Its architecture embodies several advanced features and technologies that cater to the growing demands of enterprise networks.

One of the main features of the Nortel 8250 is its robust scalability. The device supports a modular approach, allowing organizations to expand their networking capabilities easily as their needs grow. This scalability ensures that the 8250 can accommodate a wide range of applications, from small to large-scale operations, without compromising performance.

The 8250 demonstrates exceptional performance through its high-speed data processing capabilities. It is designed to handle increased traffic loads while maintaining low latency and high throughput. This makes it particularly suitable for environments where quick data access and communication are imperative, such as in VoIP and video conferencing applications.

In terms of technology, the Nortel 8250 integrates advanced switching and routing protocols, effectively facilitating efficient data management across the network. Its support for both IPv4 and IPv6 ensures compatibility with current and future networking standards, making it a future-proof solution for enterprises that require adaptability amidst evolving technology landscapes.

Security is another critical characteristic of the Nortel 8250. The device incorporates various security features to protect against potential threats and unauthorized access. This is particularly important in today’s networking environment, where data breaches and cyber threats are increasingly prevalent.

The Nortel 8250 also excels in its ease of management. With user-friendly interfaces and robust monitoring tools, network administrators can effectively manage and configure the device with minimal effort. This streamlined management contributes to reduced operational costs and increased productivity for organizations.

Overall, the Nortel Networks 8250, model 241-5101-200, stands out as a versatile and powerful networking solution. Its scalability, high performance, advanced technologies, strong security, and ease of management make it a valuable asset for any organization looking to enhance its networking capabilities. As businesses continue to evolve and demand more from their networks, devices like the Nortel 8250 will remain crucial in meeting those challenges head-on.
Top Page Image Contents