Nortel Networks 56K manual Select Pulse Dialing, Qvalue Result Code Control, Select Tone Dialing

Page 12

P - Select Pulse Dialing

Use this command to configure the modem for pulse dialing. All subsequent

D<dial_string> commands use pulse dialing until either the T command or a tone dial modifier is received by the modem. Tone dialing is the default setting.

This command does not use parameters and generates an ERROR result code when parameters are attached to the command.

Q<value> - Result Code Control

Result codes are informational messages sent from the modem and displayed on the monitor. Basic result codes include OK, CONNECT, RING, NO CARRIER, and ERROR. Use the Q<value> command to enable or disable

result code generation by the modem. If result codes are disabled and an invalid parameter value is entered, the modem does not generate an ERROR result code because result codes are turn off.

Result codes:

_ OK if <value> = 0—1.

_ ERROR if <value> 0—1.

T - Select Tone Dialing

Use this command to configure the modem for DTMF tone dialing. All subsequent D<dial string> commands use tone dialing until either the P command or a pulse dial modifier is received by the modem. Tone dialing is the default setting. This command does not use parameters and generates an ERROR result code when parameters are attached to the command.

W<value>—Result Code Option

Use this command to select the modems CONNECT message options.

Result codes:

_ OK if <value> = 0—2.

_ ERROR if <value> 0—2.

Command

Function

 

 

W0

CONNECT result code reports DTE receive speed. Disables protocol result codes.

 

 

W1

CONNECT result code reports DTE receive speed. Enables protocol result codes.

 

 

W2

CONNECT result code reports DCE receive speed. Enables protocol result codes (default).

 

 

Z<value> - Reset and Recall Stored Profile

Use this command to make the modem go on-hook and restore the profile saved by the last &W command.

Note: Both Z0 or Z1 restore the same profile

OK if <value> = 0—1.

_ ERROR if <value> 0—1.

Command

Z0

Z1

Function

Reset and restore stored profile.

Reset and restore stored profile.

NetComm Roadster Series 56K USB Modem

�m�5�60 7

12

www.netcomm.com.au

Image 12
Contents User Guide Table of Contents PrefaceIntroduction Features & Specifications IntroductionGeneral Description Data ModemSystem Requirements Package IncludesHardware Setup Installing the 56Kbps USB ModemConfigure the Modem on Win9X/WinME/Win2000/WinXP/Vista/7 Commands Commands Basic AT Command GuideBvalue-Communication Standard Setting Cvalue-Carrier ControlDdial string-Dial Ivalue-Request ID InformationOvalue-Return to On-Line Data Mode Hvalue-Hook ControlMvalue-Speaker Control Nvalue-Modulation HandshakeZvalue Reset and Recall Stored Profile Select Pulse DialingQvalue Result Code Control Select Tone DialingTroubleshooting Troubleshooting Modem does not respond to AT commandsModem does not answer an incoming call Modem disconnects while onlineAppendix RJ11 connector and cable Appendix a Cable ConnectionsAppendix B Registering your NetComm Product Legal & Regulatory InformationCustomer Information Product Warranty GNU General Public LicenseLimitations of Warranty Product Warranty Technical Support

56K specifications

Nortel Networks, a leading telecommunications equipment manufacturer, played a crucial role in the development of modem technology during the late 1990s and early 2000s. Among its most notable contributions was the Nortel Networks 56K modem. Introduced at a time when dial-up internet access was the norm, the 56K modem represented a significant leap forward in data transmission speeds for both residential users and businesses alike.

One of the main features of the Nortel Networks 56K modem was its ability to achieve faster data rates compared to its predecessors. While earlier modems operated at speeds of 28.8 Kbps or 33.6 Kbps, the Nortel 56K modem could theoretically reach connection speeds of 56 Kbps under optimal conditions. This enhancement was made possible through the implementation of newer modulation techniques, such as Pulse Amplitude Modulation (PAM), which allowed for more efficient data transmission over standard telephone lines.

The 56K modem was designed to work effectively over existing analog phone lines, which was a crucial characteristic during that time. It could connect directly to the existing Public Switched Telephone Network (PSTN), making it accessible for millions of users without the need for any special infrastructure upgrades. This meant that both home users and businesses could benefit from the increased speed without significant investment.

Another notable feature was the robustness of the Nortel 56K modem's error correction capabilities. Technologies such as V.42 and V.42bis compression were integrated to enhance data integrity. These error-correcting protocols stitched together fragmented data packets, thereby ensuring reliable and stable connections, even over less-than-perfect phone lines. This reliability was vital for users who relied on modems for email, file transfers, and browsing the web.

In terms of compatibility, the Nortel Networks 56K modem was designed to work seamlessly with various operating systems, ensuring that users could connect to the internet regardless of their hardware setup. The plug-and-play capability made installation straightforward, allowing users to start browsing the web quickly.

While the Nortel Networks 56K modem was eventually eclipsed by DSL and broadband technologies that offered even higher speeds, it played an instrumental role in transitioning users from slower modems to a more connected world. The impact of Nortel's 56K modem can still be felt today, as it laid the groundwork for future innovations in digital communications and paved the way for the fast-paced internet landscape we experience now.