3 Tune in to a station you want while “M” is flashing.
Storing stations in memory | ENGLISH |
You can use one of the following two methods to | |
|
¢
4
Press 
¢ to tune in to stations of higher frequencies.
Press 4 
to tune in to stations of lower frequencies.
store broadcasting stations in memory. |
• Automatic preset of FM stations: SSM (Strong- |
station Sequential Memory) |
• Manual preset of both FM and AM stations |
FM station automatic preset: SSM |
You can preset 6 local FM stations in each FM band |
(FM1, FM2 and FM3). |
•If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.
•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz intervals for AM) until you release the button.
When an FM stereo broadcast is hard to receive:
1Press MODE to enter the functions mode while listening to an FM stereo broadcast.
2Press MO (monaural), while still in the functions mode, so that the MO indicator lights up on the display.
Each time you press the button, the MO indicator lights up and goes off alternately.
MODE | MO |
|
1 Select the FM band (FM1 – 3) you want to store FM stations into.
FM1 
FM2 
FM3
F M / A M | AM |
|
2 Press and hold both buttons for more than 2 seconds.
¢
4
“SSM” appears, then disappears when automatic preset is over.
When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved (the ST indicator goes off).
Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2 or FM3). These stations are preset in the number buttons — No.1 (lowest frequency) to No.6 (highest frequency). When automatic preset is over, the station stored in number button 1 will be automatically tuned in.
7
