Nortel Networks 56K manual Appendix a Cable Connections, RJ11 connector and cable

Page 16

Appendix A: Cable Connections

This cable information is provided for your reference only. Please ensure you only connect the appropriate cable into the correct socket on either this product or your computer.

If you are unsure about which cable to use or which socket to connect it to, please refer to the hardware installation section in this manual. If you are still not sure about cable connections, please contact a professional computer technician or NetComm for further advice.

RJ11 connector and cable

An RJ-11 connector is the small, modular plug used for most analog telephones. It has six pin slots in the head, but usually only two or four of them are used.

 

RJ-11 Connector

Normal Assignment

 

Pin Assignment

 

 

 

 

 

1

Signal Ground

 

 

 

 

2

CTS

 

 

 

 

3

RXD

 

 

 

 

4

TXD

 

 

 

 

5

+5 Volts In

 

 

 

 

6

Signal Ground

 

 

 

605 to RJ-11 adapter

The 605 to RJ-11 adaptor is provided to comply with the older 610 Telstra wall socket. The 605 to RJ-11 adapter may be used to convert the supplied RJ-11 cable, if the older connection is required.

USB cable

A typical USB cord has an “A” connection (“upstream” to plug into the computer) and a “B” connection (“downstream” to plug into the device).

By using different connectors on the upstream and downstream ends, cable connection is simplified. The “B” connection will fit a into the “B” socket of any USB device. Similarly, any “A” connector can be plugged into any

“A” socket, such as on a computer.

If it is a new device, the operating system auto-detects it and asks for the driver disk. If the device has already been installed, the computer activates it and starts talking to it. USB devices can be connected and disconnected at any time.

“B” Connection

“A” Connection

NetComm Roadster Series 56K USB Modem

�m�5�60 7

16

www.netcomm.com.au

Image 16
Contents User Guide Table of Contents PrefaceIntroduction Features & Specifications IntroductionGeneral Description Data ModemSystem Requirements Package IncludesHardware Setup Installing the 56Kbps USB ModemConfigure the Modem on Win9X/WinME/Win2000/WinXP/Vista/7 Commands Commands Basic AT Command GuideBvalue-Communication Standard Setting Cvalue-Carrier ControlDdial string-Dial Ivalue-Request ID InformationOvalue-Return to On-Line Data Mode Hvalue-Hook ControlMvalue-Speaker Control Nvalue-Modulation HandshakeZvalue Reset and Recall Stored Profile Select Pulse DialingQvalue Result Code Control Select Tone DialingTroubleshooting Troubleshooting Modem does not respond to AT commandsModem does not answer an incoming call Modem disconnects while onlineAppendix RJ11 connector and cable Appendix a Cable ConnectionsLegal & Regulatory Information Appendix B Registering your NetComm ProductCustomer Information Product Warranty GNU General Public LicenseLimitations of Warranty Product Warranty Technical Support

56K specifications

Nortel Networks, a leading telecommunications equipment manufacturer, played a crucial role in the development of modem technology during the late 1990s and early 2000s. Among its most notable contributions was the Nortel Networks 56K modem. Introduced at a time when dial-up internet access was the norm, the 56K modem represented a significant leap forward in data transmission speeds for both residential users and businesses alike.

One of the main features of the Nortel Networks 56K modem was its ability to achieve faster data rates compared to its predecessors. While earlier modems operated at speeds of 28.8 Kbps or 33.6 Kbps, the Nortel 56K modem could theoretically reach connection speeds of 56 Kbps under optimal conditions. This enhancement was made possible through the implementation of newer modulation techniques, such as Pulse Amplitude Modulation (PAM), which allowed for more efficient data transmission over standard telephone lines.

The 56K modem was designed to work effectively over existing analog phone lines, which was a crucial characteristic during that time. It could connect directly to the existing Public Switched Telephone Network (PSTN), making it accessible for millions of users without the need for any special infrastructure upgrades. This meant that both home users and businesses could benefit from the increased speed without significant investment.

Another notable feature was the robustness of the Nortel 56K modem's error correction capabilities. Technologies such as V.42 and V.42bis compression were integrated to enhance data integrity. These error-correcting protocols stitched together fragmented data packets, thereby ensuring reliable and stable connections, even over less-than-perfect phone lines. This reliability was vital for users who relied on modems for email, file transfers, and browsing the web.

In terms of compatibility, the Nortel Networks 56K modem was designed to work seamlessly with various operating systems, ensuring that users could connect to the internet regardless of their hardware setup. The plug-and-play capability made installation straightforward, allowing users to start browsing the web quickly.

While the Nortel Networks 56K modem was eventually eclipsed by DSL and broadband technologies that offered even higher speeds, it played an instrumental role in transitioning users from slower modems to a more connected world. The impact of Nortel's 56K modem can still be felt today, as it laid the groundwork for future innovations in digital communications and paved the way for the fast-paced internet landscape we experience now.