Nortel Networks DCT1900 manual This is not Pinned OUT AS a 568A or 568B Connector

Technical Product Manual - DCT1900

Installation Instructions, Modular Cabinet – CLU/SLU to Base Station Cabling

---------------------------------- BE AWARE -------------------------------------------

----THIS IS NOT PINNED OUT AS A 568A OR 568B CONNECTOR-----

PIN 1

Green/White

White/Green

White/Blue

White/Orange

White/Brown

Brown/White

Blue/White

Orange/White

Fig. 21-4 Base Station RJ-45 Connector

If a base station is going to be powered locally, using an AC/DC adapter in the last IDF, then only the first two pair, SC0 and SC1, should be hooked up for that Base Station on the 66 block. In the last IDF, connect the output of the AC/DC adapter to the white/green pair going out to the RJ45 connector (Fig. 21-4) of the Base Station as shown in Figure 21-5.

Install-DCT1900/R8/mw	21-5
© 2000-2005