Nortel Networks DCT1900 manual Connection of Wrist Strap for ESD

Technical Product Manual - DCT1900

Installation Instructions, or BDVNB 101 01/3

4.10Connection of Wrist Strap for ESD

After mounting the Modular Cabinet(s), the installer has to protect against damaging system boards by ESD. The installer must use a wrist strap which must be connected to the cabinet at the connector indicated in Figure 4–2 and Figure 4-3.

Note:

The Modular Cabinet must be connected to protective ground.

Flat Cable

R-network

R201, R202

and R207

R-network

R401, R402

and R407

R-network installed	Protective Ground Cable
R-network removed

Fig. 4-9 Example of Interconnecting the System Bus and the Ground Plates

Install-DCT1900/R8/mw	4-11
© 2000-2005